This little heart box is my attempt to organise my desktop with a few recycled boxes. For the first one, tried out a heart box. The base is made from cardboard, since I wasn't too sure I would be capable of weaving a heart shaped base!! 😄😄 The heart-shaped cardboard was covered with newspaper that was then painted the same colour as the tubes.

Based on the size of the box, I started with tubes placed at an interval of 1.5 cms. I find this is the ideal placement of tubes. I tried 2 cms distance but I found the weaving to be too spaced out. Smaller distances makes weaving difficult for me! So 1.5 cms it is.

After that, it was a very simple weave with 2 tubes. Finishing off was also pretty easy. Then it was just a matter of glazing the box to give me a really hard and sturdy heart-shaped organiser for my desk.

Model Details:

Model: Heart Shaped Desk Organiser

Difficulty Level: High Intermediate

Tutorial (making newspaper tubes): Youtube

Tutorial for making the edge: Youtube

After completing the origami owl designed by Roman Diaz last month, I realised that the book "Drawing Origami (Tome 1)" has another of his owls. This owl is a little more complicated and more realistic than the last one. But I must admit, the first owl that I folded is more dear to me than this one ♡♡

As for folding this one, I used the same animal hide paper that I had used for the previous owl. While the recommended paper size is 15 * 15 cms (6 inches) kami, I used a 12 cms (5 inches) square, which worked out quite well. The instructions in the book are fairly clear, though I faced some difficulties the first time I folded it.

The book is very colourful with plenty of models. Among them, I still want to try Ekaterina Lukasheva's Rubin, Mindaugas Cesnavicius's Swallow, Quentin Trollip's Bambi and Patricio Kunz Tomic's Joe Cocker. I think the other ones might be a little too complicated for me! Well, these are all projects for another day!


Model Details:

Model: Owl 

Creator: Roman Diaz 

Book: Drawing Origami

Author: Halle, Pere Olivella, Nicolas Terry

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 5 inches

Model Size: ~3 inches in height

Tutorial: Youtube

When I had started my origami journey, one of the first life-forms that I had folded was Roman Diaz's panda from his book "Origami Essence". Since then, I hadn't attempted to fold any of the other models in the book because they were a little too difficult for me.

Anyway, in recent days, I decided to revisit the models and decided to try out the owl, which is the second model in the book. The owl or the buho requires a square sheet of origami or kami paper, preferably duo-coloured. A square of at least 15 cms (6 inches) is suggested.

Since I wanted something small, I decided to try with a 10 cms (4 inches) square. I used some lovely duo-coloured kami paper, with an animal hide print on one side. I must say, when I saw the final owl. I was delighted both with my choice of paper and with the size I had used. The final owl was about 2 inches in height.

Model Details:

Model: Owl 

Creator: Roman Diaz 

Book: Origami Essence

Author: Roman Diaz

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 4 inches

Model Size: ~2 inches in height

Tutorial: Youtube

Tomoko Fuse's spirals has always fascinated me. And since my last Tomoko Fuse origami was this pyramid box in May, I figured I would try out another of her spirals origami.

This origami spiral cube has been on my to-do list for quite a few years now! And finally I managed to do it! The cube is made from strips cut out of A4 paper. Each A4 sheet is cut into 4 strips. A total of 12 such strips are needed, which means 3 A4 sheets will be required.

As with most of Tomoko Fuse's models, the individual modules are fairly easy to fold. Assembly is a lot more challenging. I assembled the first three faces, on a flat surface. And I admit, I glued the tips of the spiral so that it didn't unravel easily. Once the three faces was done, the fourth face was decidedly more difficult but manageable. Then the top and bottom of the cube. Assembling one of the 2 ends was easy, because I could insert my hand inside the cube to hold the arms of the spiral and then continue with the assembly. The true challenge was, as always, in finishing the final face. I didn't have proper support, which meant I was forming the spiral in air! But finally, with a good deal of patience, I succeeded!

While I am happy with the cube, I find it too big for my taste. Hope to make another one from A5 paper. The principle remains the same. 4 strips from each A5, 12 strips in all.

Model Details:

Model: Spiral Cube

Creator: Tomoko Fuse

Book: Let's Fold Spirals

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Rectangle

Paper Size: 11.7 inches * 2 inches

Model Size: ~3.5 inches across

Number of Modules: 12

Tutorial: kusuda.ru

After making this origami kusudama, designed by Ekaterina Lukasheva, I have a special respect for people who work with miniatures! For this model, I had some double-sided paper that was left over from a previous origami modular that I had done. So I decided to use that paper.

The size of those squares were 2 inches. Since this kusudama required paper in the ratio 1:2, I cut each of the squares in half which resulted in 30 pieces of 1 inch by 2 inches. And then proceeded with this kusudama.

While making the individual modules was quite simple, assembly was a real challenge, given the small sizes of the folded modules. Patience is of the essence and of course, a toothpick! I finally ended up gluing the modules to ensure that they did not come undone while assembling them.

Overall, an interesting kusudama. But I will think twice if I have to fold this one again! 😆😆

Model Details:

Model: Apricot

Creator: Ekaterina Lukasheva

Book: Modern Kusudama Origami

Author: Ekaterina Lukasheva

Difficulty Level: High Intermediate

Paper Ratio: Rectangle in ratio 1:2

Paper Size: 1 inch by 2 inches

Model Size: ~2 inches in diameter

Modules: 30



Way back in 2010, I had tried out Mette Pederson's Mette rings - the 3D version. Mainly because they are made from 12 units, instead of the 18 modules needed for the 2D version.

In recent days, I decided to try out the 2D version. The individual modules are easy to fold, so is the assembly. Assembly is without glue and is really solid, in the sense that there is no way it will come undone by itself.

In addition to trying out this model, I have another project in mind - making a ring of rings, using 20 mette rings. I have decided to go ahead with a gradation of colours starting from violet and going up to pink. That mean, I need to fold a total of 360 modules! Which will make it my biggest project since I started my blog! A big goal, and one that I hope to complete by this year end.



Model Details:

Model: Mette's Ring

Creator: Mette Pederson

Book: Mette Units

Author: Mette Pederson

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Diagram: Mette Units

Modules: 18


The Gekkin kusudama started off as a way to use some leftover pieces of squares that I had mistakenly cut out for my last kusudama, Kusudama Estrelle Flor. While I needed only 15 squares of each colour, I had incorrectly calculated and cut 30 squares. So I ended up with the extra squares which I did not want to waste. 

So the Gekkin kusudama came in very handy. I used 10 dark purple, 10 lavender and 10 white squares to make this very pretty kusudama. A tassel and some beads and I ended up with an attractive ornament! 

The modules are pretty easy to fold and assembly is also straight forward. Since I wanted to make it into an ornament, I glued the joints. The curls add a very nice touch to the kusudama, giving the impression of a bouquet, I thought.



Model Details:

Model: Gekkin 

Creator: Maria Vahrusheva

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inches 

Model Size: ~5 inches in diameter

Modules: 30

Diagram: Mediafire

Tutorial: Youtube