Happy Valentine's Day! 

Well, this year for Valentine's, I decided to fold a long-pending model that has been on my to-do list for the past 3-4 years. Every year I miss Valentine's Day and decide to fold the model the next year. Finally, this year, I actually remembered to give this model a go. 

This is an origami wreath, designed by the amazing Francesco Guarnieri! I love folding wreaths - they are modular origami and I absolutely adore modular origami and they are quick to fold, given that they usually require 8 modules (as opposed to the usual 30-unit modulars that I fold). So this origami Garland of hearts (Ghirlanda di cuori) fit the bill very nicely. 

I used double-sided, red-pink 60 gsm origami paper, which turned out perfect for this model. 7.5 cms (3 inches) squares resulted in a wreath that measured about 12.5 cms (~ 5 inches) in diameter. 

Folding the individual modules started off easily enough. The last couple of steps, where the 3-D heart is folded, was a little tricky. Loved the way the heart locks into place! The join between the modules is easy and very stable - absolutely no glue required for this one! Overall, a lovely model to fold. 

For this Valentine's Day, why don't you give this a go? 

Model Details:

Model: Origami Garland of Hearts (Ghirlanda di Cuori)

Creator: Francesco Guarnieri

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inch square

Model Size: ~ 5 inches across

Modules: 8

Instructions:  Origami poesie di carta

 

As I had said in my previous post, while making the origami spiral cube, I wanted to retry this model using A5 paper instead of A4. A4 paper resulted in a fairly large cube which wasn't very appealing to me.

The coronavirus lockdown has given me ample time, so I decided to redo the model, using some lovely kami paper that I had. The paper turned out perfect for this model, since it was light enough that I could fold the spirals and assemble it easily.

Usually smaller origami models are more difficult to do than bigger ones, but in this model, I found the smaller one easier to assemble! Mainly because it was small enough to hold in hand while folding. I would definitely recommend the A5 size to the A4!

Model Details:

Model: Spiral Cube

Creator: Tomoko Fuse

Book: Let's Fold Spirals

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Rectangle

Paper Size: 8.3 inches * 1.45 inches

Model Size: ~2.5 inches across

Number of Modules: 12

Tutorial: kusuda.ru

Recently I discovered another origami artist from Thailand, Sansanee Termtanasombat. As per her blog, PrwOrigami, her goal is to collect 1000 kusudamas. She also provides tutorials for a number of the models on her blog.

Of the models that have tutorials, I liked the heartbreak kusudama, for which the suggested colours are red and black. Naturally. But, I decided to go another way and chose pastel shades. I am not sure how well this combination of light blue, cream and white has turned out, but I quite like the pleasant colours. The individual modules are fairly easy to fold and so is the assembly, which is the traditional sonobe assembly.

In recent days, I seem to have developed a love for tassels, so I made a tassel for this kusudama too and made it into a hanging ornament.

Model Details:

Model: Heartbreak Kusudama 

Creator: Sansanee Termtanasombat (Praew)

Difficulty Level: High Intermediate

Paper Ratio: 1:2

Paper Size: 3 inches by 1.5 inches

Model Size: ~4 inches in diameter

Modules: 60

Tutorial: Youtube

After completing the origami owl designed by Roman Diaz last month, I realised that the book "Drawing Origami (Tome 1)" has another of his owls. This owl is a little more complicated and more realistic than the last one. But I must admit, the first owl that I folded is more dear to me than this one ♡♡

As for folding this one, I used the same animal hide paper that I had used for the previous owl. While the recommended paper size is 15 * 15 cms (6 inches) kami, I used a 12 cms (5 inches) square, which worked out quite well. The instructions in the book are fairly clear, though I faced some difficulties the first time I folded it.

The book is very colourful with plenty of models. Among them, I still want to try Ekaterina Lukasheva's Rubin, Mindaugas Cesnavicius's Swallow, Quentin Trollip's Bambi and Patricio Kunz Tomic's Joe Cocker. I think the other ones might be a little too complicated for me! Well, these are all projects for another day!

Model Details:

Model: Owl 

Creator: Roman Diaz 

Book: Drawing Origami

Author: Halle, Pere Olivella, Nicolas Terry

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 5 inches

Model Size: ~3 inches in height

Tutorial: Youtube

Tomoko Fuse's spirals has always fascinated me. And since my last Tomoko Fuse origami was this pyramid box in May, I figured I would try out another of her spirals origami.

This origami spiral cube has been on my to-do list for quite a few years now! And finally I managed to do it! The cube is made from strips cut out of A4 paper. Each A4 sheet is cut into 4 strips. A total of 12 such strips are needed, which means 3 A4 sheets will be required.

As with most of Tomoko Fuse's models, the individual modules are fairly easy to fold. Assembly is a lot more challenging. I assembled the first three faces, on a flat surface. And I admit, I glued the tips of the spiral so that it didn't unravel easily. Once the three faces was done, the fourth face was decidedly more difficult but manageable. Then the top and bottom of the cube. Assembling one of the 2 ends was easy, because I could insert my hand inside the cube to hold the arms of the spiral and then continue with the assembly. The true challenge was, as always, in finishing the final face. I didn't have proper support, which meant I was forming the spiral in air! But finally, with a good deal of patience, I succeeded!

While I am happy with the cube, I find it too big for my taste. Hope to make another one from A5 paper. The principle remains the same. 4 strips from each A5, 12 strips in all.

Model Details:

Model: Spiral Cube

Creator: Tomoko Fuse

Book: Let's Fold Spirals

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Rectangle

Paper Size: 11.7 inches * 2 inches

Model Size: ~3.5 inches across

Number of Modules: 12

Tutorial: kusuda.ru

After making this origami kusudama, designed by Ekaterina Lukasheva, I have a special respect for people who work with miniatures! For this model, I had some double-sided paper that was left over from a previous origami modular that I had done. So I decided to use that paper.

The size of those squares were 2 inches. Since this kusudama required paper in the ratio 1:2, I cut each of the squares in half which resulted in 30 pieces of 1 inch by 2 inches. And then proceeded with this kusudama.

While making the individual modules was quite simple, assembly was a real challenge, given the small sizes of the folded modules. Patience is of the essence and of course, a toothpick! I finally ended up gluing the modules to ensure that they did not come undone while assembling them.

Overall, an interesting kusudama. But I will think twice if I have to fold this one again! 😆😆

Model Details:

Model: Apricot

Creator: Ekaterina Lukasheva

Book: Modern Kusudama Origami

Author: Ekaterina Lukasheva

Difficulty Level: High Intermediate

Paper Ratio: Rectangle in ratio 1:2

Paper Size: 1 inch by 2 inches

Model Size: ~2 inches in diameter

Modules: 30

The Gekkin kusudama started off as a way to use some leftover pieces of squares that I had mistakenly cut out for my last kusudama, Kusudama Estrelle Flor. While I needed only 15 squares of each colour, I had incorrectly calculated and cut 30 squares. So I ended up with the extra squares which I did not want to waste. 

So the Gekkin kusudama came in very handy. I used 10 dark purple, 10 lavender and 10 white squares to make this very pretty kusudama. A tassel and some beads and I ended up with an attractive ornament! 

The modules are pretty easy to fold and assembly is also straight forward. Since I wanted to make it into an ornament, I glued the joints. The curls add a very nice touch to the kusudama, giving the impression of a bouquet, I thought.

Model Details:

Model: Gekkin 

Creator: Maria Vahrusheva

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inches 

Model Size: ~5 inches in diameter

Modules: 30

Diagram: Mediafire

Tutorial: Youtube

After the strenuous coiled or root-woven tray from my last post, I was more than happy to try out this acorn box made from black newspaper tubes.

I have been trying out various acrylic colours which will completely blot out any print in my newspaper tubes. For the lighter colours, I have no choice but to use white or mostly-white tubes. Otherwise the print is very obviously visible and I just don't like it. As a consequence, I find that I am left out with a  lot of tubes that have newspaper print/coloured pictures on them.

One way to go is to use them as-is and weave my boxes with the print and pictures visible in the end product. I find that there are a lot of people who like this and I have had some orders where I have been specifically asked to use the newspaper tubes without any colours added.

On the other hand, I have also been experimenting with dark colours that I can use on these tubes, to hide the print, and the very best colour is, of course, black. Other than black, dark blue, prussian blue, deep red and dark green also work well.

So for my acorn box, I have used black tubes to form the base and the lid. The base was woven with a form, which was a plastic bowl of the required size. I tried out a 3-strand weaving, which I liked very much. The lid started off as a flat plate, with the edges turned down to convert into a lid. I added the little knob at the very end.

Model Details:

Model: Black Acorn Box

Difficulty Level: High Intermediate

Tutorial (making newspaper tubes): Youtube

The Estrella Flor Kusudama is a modular origami created by Erny. Like my previous post, the Mt. Fuji Kusudama, the essential shape of this model is also a sonobe. And to form the sonobe modules, a total of 30 squares of paper is required. It works best if we use 15 squares of 1 colour and 15 squares of a second contrasting colour. That will bring out the flower pattern very well.

Each of the 15 squares are cut into 2 rectangles of ratio 1:2. So finally, to make the model, we will be folding 60 modules. 30 of these modules will form the flower shape and the other 30 will form the sonobe shape. The flower modules are slotted into the sonobe modules before starting the assembly. While the task seems quite daunting, the folding is not very difficult, though a little time consuming. Assembly is the usual sonobe assembly - 3 pyramids grouped in clusters of 5.

I quite like the colour choice I had made - dark purple and a light violet (or would that be mauve?) The final model is not too large, since I had used 7.5 cms squares. I decided to make it into a hanging ornament, so ended up with tassels and some beads to form the ornament.

Model Details:

Model: Kusudama Estrella Flor 

Creator: Erny

Difficulty Level: High Intermediate

Paper Ratio: 1:2

Paper Size: 3 inches by 1.5 inches

Model Size: ~4 inches in diameter

Modules: 60

Instructions: Folding in the air

Tutorial: Youtube

This blue bowl is the first large-sized bowl that I have tried, that has come out reasonably well! The problem with bowls that I have found is that, while the start is pretty standard with the help of a form, it is inward curve at the top that causes trouble.

The reason being that a form can no longer be used! So this is more of eye-balling the correct curvature so that the bowl is shaped uniformly. I have always had a problem with this and usually my bowls turn out a little too one-sided for my liking! So I am quite delighted that for the very first time, I have done a decent job and the bowl looks more centred.

I also like the way the edging has been done. The edge with a whole bunch of 'V's is more attractive than the usual edges that I use and gives a good finish to the bowl, I thought.

Model Details:

Model: Woven Bowl

Difficulty Level: High Intermediate

Tutorial (making newspaper tubes): Youtube

Uniya Filonova's Cassiopeia Kusudama has been on my to-do list for quite some time. Finally, this Mother's Day seemed to be the right occasion to try out this eye-catching design.

Did you know that Cassiopeia is actually the name of a constellation? Yep! And in the kusudama, the stars do stand out, but this modular reminds me more of a flower than a constellation. What do you think?

Getting back to the kusudama, it is made from 30 modules, with each module folded from a rectangle in the ratio 1:3. So one square will yield you 3 modules. I had used 3 inches (7.5 cms) squares that I cut into 3 rectangles. So each rectangle measured 1 inch (2.5 cms)  by 3 inches (7.5 cms). The end result was a ball about 3 inches (7.5 cms) in diameter.

While I did find both the instructions and the tutorial (links below) a little confusing initially, once you get the hang of it, the modules are very easy to fold. And even with the size I had chosen, it was not difficult to fold the individual modules.

Double sided paper works best to bring out the star. I had used some very precious paper that I absolutely love - red with white dots on one side and yellow on the other. Very happy with the selection and with the result.

The assembly is interesting - you have to try it out to appreciate it. It does not involve the usual pocket and flap assembly that you usually see in modulars, rather, one petal is folded into the adjoining petal. Very interesting and very robust. Assembly is without any glue.

Finally, a happy Mother's Day to all the moms out there! Little Miss has decided that this modular is going to be her gift for me!! 😆😆

Model Details:

Model: Cassiopeia Kusudama 

Creator: Uniya Filonova

Difficulty Level: High Intermediate

Paper Ratio: 1:3

Paper Size: 1 inch by 3 inches

Model Size: ~3 inches in diameter

Modules: 30

Instructions: Stranamasterov.ru

Tutorial: Youtube

After folding the Jaciara from the book 'Modern Kusudama Origami' by Ekaterina Lukasheva, I decided to give it another go. Only this time I tried out one of the variations of the model. And I used a smaller square, since I wasn't too happy with how big my previous model turned out to be!

This variation is the second variation for the model. The author states that the variation seems pointless till you open up the petals. And while this might be true, I must say I adored this model even in the closed-petal state! I quite liked the elegance of the closed kusudama.

But of course, when you open up the petals, it really looks like a blossomed flower. Be sure to use double-sided paper, so that the print on the other side becomes visible when it is opened.

The Jaciara is the last model in the book. There are 2 variations and another couple of Jaciara variables. Hopefully I will get a chance to try some more of these models in the future.

Model Details:

Model: Jaciara - Variation 2

Creator: Ekaterina Lukasheva

Book: Modern Kusudama Origami

Author: Ekaterina Lukasheva

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 2 inch squares

Model Size: ~2.5 inches in diameter

Modules: 30

Shades of Blue is my current version of the bowl that I had initially tried out a few days back. I am very pleased with the way this bowl has turned out. The base of smoother than my previous efforts and the weaving is much improved, even if it is not where I want it to be!

As in my previous attempt, I went ahead with a gradation in colour. The paper I have used is without any print, so the lighter colours have turned out clear and without any marking. For the darker blue, of course, the tubes with print works just as well as the tubes without print, since the print is barely visible.

To achieve a more graded colour change, I weaved a couple of rows with a mix of dark and light blue, before switching to the lighter colour. I like the effect this produces.

The side view gives a good view of the rim of the bowl. The weaving pattern is the same as the base (tutorial link at the end of the post). The rim is harder to weave than the base, because it is narrower than the base. But that gives a fuller and smoother appearance I thought. What do you think?

The bottom of the bowl is by far, my favourite part of this project! I love the evenness of the base and I think I have much improved in this one area. Of course, this is the part that is lease visible! 😆😆 But that doesn't stop me from admiring my improved attempts!! 😂😂

So what do you think? Do you like it? Should I try other colours? Do drop a comment 😀

Model Details:

Model: Woven Bowl - Shades of Blue

Difficulty Level: High Intermediate

Tutorial (making newspaper tubes): Youtube

Picture Tutorial for the thick rimmed bottom: Stranamasterov

'Modern Kusudama Origami' by Ekaterina Lukasheva is an excellent book on modular origami. To date I have already tried out 3 models and here is the fourth one - the Jaciara.

For the first attempt, I went ahead with the recommended paper size - 4 inches square. The finished model was about 5 inches in diameter - a tad too big for my liking. The next time I try, I will attempt a much smaller size, probably 2 inches or so.

The individual modules are not too difficult to fold, though it looks kinda scary at first! I liked the way the modules locked together.

There are a couple of variations mentioned. Hopefully I will get a chance to fold those as well.

Model Details:

Model: Jaciara 

Creator: Ekaterina Lukasheva

Book: Modern Kusudama Origami

Author: Ekaterina Lukasheva

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 4 inch squares

Model Size: ~5 inches in diameter

Modules: 30

Tutorial: Youtube

Swans are such beautiful, graceful creatures that have long captured the human heart. And given that they mate for life, I decided to fold this beautiful origami on Valentine's Day.

The creator of this origami swan is Fynn Jackson, well-known for his origami masks. The masks do not interest me, unfortunately, but I did enjoy folding these swans, even though, if you are a regular reader of the blog, you would know that modular origami is where my interest lies. If origami masks interest you, be sure to check out his works on Facebook and Instagram

I used fairly big-sized (9 inch squares) single-sided origami paper. Double-sided paper would have worked better I think, because no matter what I did, I could not prevent the back of the paper from being seen (See the white bits on the black and grey swans!). There is a sink at the base of the neck, which I found particularly challenging. But otherwise, this was a good model to fold.

Well, give it a go. At least it will be a change from the hearts that everyone seems to fold on Valentine's Day!! 😎

Model Details:

Model: Swan 

Creator: Fynn Jackson

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 9 inches

Model Size: ~3 inches across and ~2.5 inches in height

Diagram: Docdroid

As a gift for a friend, I had again folded the origami Patterned Icosahedron, created by Meenakshi Mukerji. I had previously folded it during the Christmas season. And enjoyed making it.

So this time, I decided to go with a pink and lavender duo-coloured paper, a favourite of my friend's, which resulted in a very pleasing modular origami. And I also went with smer unit sizes than my previous attempt and still was able to fold and assemble without any problems.

Model Details:

Model: Patterned Icosahedron

Creator: Meenakshi Mukerji

Book: Ornamental Origami

Author: Meenakshi Mukerji

Difficulty Level: High Intermediate

Paper Ratio: Rectangle in ratio 1:2

Paper Size: 3 inches * 1.5 inches

Model Size: ~ 2.5 inches in diameter

Tutorial: Youtube

Number of Modules: 30

Ok, New Year and new trials! 😆 So my latest trial in newspaper weaving involved attempting a bowl. And this has been a project of new attempts!

First, till now, my problem has been getting a good bowl shape. Why? Because one cannot use a base form when weaving the top half of the bowl. This is more of weaving by look-and-feel and frankly speaking, I am not yet very good at this look-and-feel weaving!! But, I am getting there. I hope!! 😄😄 And this bowl was my first attempt at that.

In addition, I tried out a new way of moving from the base to the walls of the bowl. This gives a nice, thick rim to the base, which makes the bowl much more stable than usual. I found this style of weaving quite difficult, but in the days to come I hope to master this technique.

And last, I ended up using a mix of 2 colours randomly! A rust-coloured base with a orange coloured tubes in the rim of the bowl. Well, this is my attempt to try out new combinations in the hopes of striking something interesting! I don't know if I have achieved what I hoped for, but at least I had a go at it!!

Model Details:

Model: Woven Bowl

Difficulty Level: High Intermediate

Tutorial (making newspaper tubes): Youtube

Picture Tutorial for the thick rimmed bottom: Stranamasterov

The Origami Patterned Icosahedron has been on my to-do list for quite some time now. This pretty icosahedron is designed by the amazing Meenakshi Mukerji. The icosahedron is assembled using 30 modules and looks best with dual coloured paper. The same module can be assembled using 12 units to form the Patterned Octahedron.

The modules are pretty easy to fold and are folded from a rectangle in ratio 1:2 i.e., a square cut into two. I had used a green-red combination in the hopes of adding it to my Christmas Tree. But I get the impression that this looks more like a strawberry than an icosahedron, courtesy of the black dots on the red, I guess 😄😄 Nevertheless, it is a good modular to fold.

The assembly is, by modular origami standards, fairly easy. I would still recommend plenty of paper clips and an equal amount of patience when assembling this one!

Model Details:

Model: Patterned Icosahedron

Creator: Meenakshi Mukerji

Book: Ornamental Origami

Author: Meenakshi Mukerji

Difficulty Level: High Intermediate

Paper Ratio: Rectangle in ratio 1:2

Paper Size: 3.5 inches * 1.75 inches

Model Size: ~ 3 inches in diameter

Tutorial: Youtube

Number of Modules: 30

Aldo Marcell's modular origami models are really, really pretty to look at! I had previously done the ever-popular Tornado.

So this time, I decided to work on the Cyclon model. Overall, the model is very economical, in that, the paper is in the ratio 1:3. Which means from 1 square, I managed to get 3 modules. Considering I was using some of my precious double-sided paper, this was very nice!

And folding the individual modules was also pretty easy. But the assembly is a whole different story altogether! It is seriously difficult! And this was aggravated by the size of the modules. Since I had divided up a 3-inch square into 3, I was working with small pieces of paper and, while I have folded really tiny pieces for my origami jewellery, it was obvious I have lost the touch of handling small pieces.

So to reiterate, the modules are easy to fold but really difficult to assemble! At one point, I was fairly certain that I was just going to lose patience and crush the whole thing 😔 It was only the thought of folding 30 modules again that stopped me from flinging it all away!

Anyway, I am glad I persisted. I am happy with the outcome. But going forward, I will doubly careful before choosing any of Aldo Marcell's models to fold 😆😆

Model Details:

Model: Cyclon 

Creator: Aldo Marcell

Difficulty Level: High Intermediate

Paper Ratio: 1:3

Paper Size: 1 inch by 3 inches

Model Size: ~2.5 inches in diameter

Modules: 30

Instructions: Stranamasterov.ru 

After working on the 4th variation in the last post, I decided to try out one final variation of the octagonal boxes from Tomoko Fuse's 'Joyful Origami Boxes' before moving on to other models.

Yet again, I decided to use my double-sided paper - in this case, paper that is blue on one side and printed with little flowers on the other. And yet again, only the final module is provided and it is up to us to figure out the method to fold. This is the 1st variation on page 72.

Each paper square that I have used is 3 inches in size and the end result is an attractive box, about 2.5 inches across. For the base, instead of using the same double-sided paper, I used blue 3-inch squares of printer paper. That ensured that the base was very sturdy.

With this, I am done with the boxes from Joyful Origami Boxes. I will definitely revisit this book at a later date, since it still has a number of lovely boxes for me to try out 😃

Model Details:

Model: Octagon Box - 1th Variation

Creator: Tomoko Fuse

Book: Joyful Origami Boxes

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: 2.5 inches across

Number of Modules: 16