Recently I discovered a Youtube Origamist - Origami Kankichi. I later found out that he does have a blog and various other social media sites, but I prefer the youtube channel. Well, on his channel, he regularly posts tutorials on folding and assembling origami modulars. Most of this models are 30-unit assembly and of these, I especially like the sonobe variations - I have a particular fondness for sonobes. So after much deliberation, I decided to try out one of the sonobe variations that he has designed - the Mt. Fuji Kusudama.

The kusudama is a representation of Mt. Fujiyama in Japan. Naturally, it works best with blue and white paper. But, for me, the first time I saw this kusudama, I was reminded of Tomoko Fuse's Chrysanthemum Globe kusudama. So I decided to use a dark pink and white paper, to resemble a chrysanthemum covered mountain, I guess. Anyway, any contrasting colours should work out well for this kusudama.

The modular is made from 15 squares of dark pink and 15 squares of white origami paper. Each of the 15 squares are cut into 2 rectangles of ratio 1:2. So finally, to make the model, we will be folding 60 modules. 30 of these modules will form the mountain shape and the other 30 will form the sonobe base. The mountain modules are slotted into the sonobe bases before starting the assembly. While the task seems quite daunting, the folding is not very difficult, though a little time consuming. Assembly is the usual sonobe assembly - 3 pyramids grouped in clusters of 5.



Model Details:

Model: Mt. Fuji Kusudama  

Creator: Origami Kankichi

Difficulty Level: Low Intermediate

Paper Ratio: 1:2

Paper Size: 3 inches by 1.5 inches

Model Size: ~4 inches in diameter

Modules: 60

Tutorial: Youtube


One of the traditional methods of basket-weaving involves a technique called coiling. This technique combines a process of coiling materials such as grass and binding them together using flexible fibres.

The same process can be applied to tubes made from newspaper or magazines. Here the tubes are used in both the processes - they are wound and held together by other tubes. I first came across this technique of weaving in Pinterest and have since been fascinated by the method.

When I got an opportunity to try it out, I first attempted it using newspaper tubes. Needless to say, it wasn't much of a success! My coiling was loose and the tubes that held the coils together were not placed close enough to give a tight weave. And once you fail, even in something like craft work, it takes a lot of courage to get back on the proverbial horse, doesn't it?

So, after many months and with a lot of hesitation, I tried out this blue tray, in the shape of a leaf. The tubes are made from newspaper strips, around 10 mm in width and 260 mm in length, rolled around a 2mm skewer. I painted it prussian blue, since that was the colour I had in abundance! This time, since I knew what to expect, I was able to coil much better. Overall, it gave me much better results than my first attempt. The shaping is still a problem and that takes more practise I guess. On the whole, I am quite pleased with this attempt.

While this technique is more challenging than regular weaving, the result if much more pleasing. But I would not attempt this type of weaving unless I had a lot of time, because without doubt, it is much more time-consuming that the regular weaving that I do. This tray took me a good 3 days to complete! And that is just the coiling part. Time taken for rolling the tubes, painting and glazing the final product also needs to be considered.



Model Details:

Model: Coiled Blue Leaf Tray

Difficulty Level: Complex

Tutorial (making newspaper tubes): Youtube

Tutorial (coiling or root-weaving technique): Youtube

For the very first time, Little Miss went on a trip without me! She had gone on a weekend trip with her grand parents and her uncle's family. Well, more heart-rending for the mom than for the daughter, I think! 😆

Anyway, during this trip, my wonderfully thoughtful little girl decided to buy something for my husband and for me. She put in a lot of thought into the gifts and we feel blessed to receive them. For my husband, she got a shirt in his favourite colour and for me, she bought some gorgeous origami washi paper in a variety of colours! I am truly touched.

So such a thoughtful gift required a well thought-out origami. So after a lot of research - and I assure you I did quite a bit of research - I decided to make this beautiful pyramid box by the wonderfully amazing Tomoko Fuse.

Absolutely love the way it has turned out. And Little Miss also liked what I finally came up with :) The model is taken from the book 'Origami Boxes' by Tomoko Fuse and is published by Tuttle Publishing. The first part of the book starts with a lot of variations to the traditional Masu box, followed by the Pyramid Box and finally, the Dome Box. Part 2 deals with modular boxes from square sheets of paper. Finally, Part 3 deals with modular boxes made from rectangular sheets of paper. It is a very good book, I thought, with a lot of colourful pictures to help one visualise better.

As for the Pyramid Box, each box is made from 2 sheets of origami paper, 6 inches squares. The steps are not very difficult to follow, though the final collapse when making the lid might prove a little challenging initially. A variation is also shown for the lid - that is the yellow box in the picture above. For the base, Tomoko Fuse has also kindly provided instructions for increasing the size of the base and also instructions to make it more sturdy. The base is, of course, easier to make than the lid.

Altogether, a good origami project to work on and I thought, a fitting use of some lovely washi paper.

Model Details:

Model: Pyramid Box

Creator: Tomoko Fuse

Book: Origami Boxes

Author: Tomoko Fuse

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 6 inches

Model Size: 2.5 inches across and 2.5 inches in height

This blue bowl is the first large-sized bowl that I have tried, that has come out reasonably well! The problem with bowls that I have found is that, while the start is pretty standard with the help of a form, it is inward curve at the top that causes trouble.

The reason being that a form can no longer be used! So this is more of eye-balling the correct curvature so that the bowl is shaped uniformly. I have always had a problem with this and usually my bowls turn out a little too one-sided for my liking! So I am quite delighted that for the very first time, I have done a decent job and the bowl looks more centred.

I also like the way the edging has been done. The edge with a whole bunch of 'V's is more attractive than the usual edges that I use and gives a good finish to the bowl, I thought.

Model Details:

Model: Woven Bowl

Difficulty Level: High Intermediate

Tutorial (making newspaper tubes): Youtube

Uniya Filonova's Cassiopeia Kusudama has been on my to-do list for quite some time. Finally, this Mother's Day seemed to be the right occasion to try out this eye-catching design.

Did you know that Cassiopeia is actually the name of a constellation? Yep! And in the kusudama, the stars do stand out, but this modular reminds me more of a flower than a constellation. What do you think?

Getting back to the kusudama, it is made from 30 modules, with each module folded from a rectangle in the ratio 1:3. So one square will yield you 3 modules. I had used 3 inches (7.5 cms) squares that I cut into 3 rectangles. So each rectangle measured 1 inch (2.5 cms)  by 3 inches (7.5 cms). The end result was a ball about 3 inches (7.5 cms) in diameter.

While I did find both the instructions and the tutorial (links below) a little confusing initially, once you get the hang of it, the modules are very easy to fold. And even with the size I had chosen, it was not difficult to fold the individual modules.

Double sided paper works best to bring out the star. I had used some very precious paper that I absolutely love - red with white dots on one side and yellow on the other. Very happy with the selection and with the result.

The assembly is interesting - you have to try it out to appreciate it. It does not involve the usual pocket and flap assembly that you usually see in modulars, rather, one petal is folded into the adjoining petal. Very interesting and very robust. Assembly is without any glue.

Finally, a happy Mother's Day to all the moms out there! Little Miss has decided that this modular is going to be her gift for me!! 😆😆

Model Details:

Model: Cassiopeia Kusudama 

Creator: Uniya Filonova

Difficulty Level: High Intermediate

Paper Ratio: 1:3

Paper Size: 1 inch by 3 inches

Model Size: ~3 inches in diameter

Modules: 30

Instructions: Stranamasterov.ru

Tutorial: Youtube

Once I finished the clown fish, a.k.a Nemo, I found that there was a similar modular version of Nemo's friend - Dory, who is a Blue Tang. So I ended up making this one too. This model is even easier to do than Nemo, because of the bigger size of this fish.

Similar to the clown fish, this one is also not a pure origami model, since it involves gluing of the pieces. And this one is also made from 4 different sized squares, albeit different colours - 2 of the squares are yellow, one blue and one black, since these are the colours of the blue tang fish. This model is also created by Mariko Miyamoto of Oriart.

While each module is folded from a square, the size of the square varies.  So the body is made from a blue 15 cm square, the black section is made from black 10 cm square, the little yellow fin between the black and blue sections is made from a yellow square of 3.75 cms and finally, the tail is made from a yellow square, 7.5 cms side. The different modules are held together by glue or tape.

So, have a go at it. It is a fun model and is sure to attract a young audience!


Model Details:

Model: Blue Tang 

Creator: Mariko Miyamoto

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: Blue 15 cm square | Black 10 cm square | Yellow 3.75 cm square | Yellow 7.5 cm square

Model Size: ~5 inches across

Tutorial: Youtube Part 1 and Part 2


I am sure most of us have watched the animated movie "Finding Nemo". I have watched this movie, repeatedly, because Little Miss loves it! So naturally, when I came across this youtube tutorial to fold a two-dimensional clown fish, I couldn't resist folding it!

The fish is not a pure origami model, since it involves gluing of the pieces but I guess we could say that it is a modular one, made from 4 modules - a tail, a body, the head and the fins and is created by Mariko Miyamoto of Oriart.

While each module is folded from a square, the size of the square varies.  So the tail is made from a 5 cm square, the body from a 10 cm square, the fins from 7 cm square and the head from 5 cm square. Obviously the model works best with a rich orange single-sided paper ie., paper that is orange on one side and white on the other. The different modules are held together by glue or tape.

The sizes I have mentioned, give a clown fish that is the bigger of the two in the picture. I named this one Marlin 😀 And naturally, Little Miss wanted a smaller version, for Nemo. So I halved all the values from the previous model to end up with a mini clown fish - Nemo. Though the squares were small, since the model was fairly easy, I was able to make the smaller fish without any trouble.

So, have a go at it. It is a fun model and is sure to attract a young audience! And the lovely alternating colours adds a whole lot of beauty to the characters.

Model Details:

Model: Clown Fish 

Creator: Mariko Miyamoto

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 2 squares of 5 cm (2 inches), 1 square each of 10 cm (4 inches) and 7 cm (2.7 inches) for the bigger fish
2 squares of 2.5 cm (1 inch), 1 square each of 5 cm (2 inches) and 3.5 cm (1.3 inches) for the smaller fish

Model Size: ~3 inches across (bigger fish) and ~2.5 inches across (smaller fish)

Tutorial: Youtube