Cherry blossoms are beautiful flowers that grow in abundance in Fall. When one thinks of a cherry blossom, one tends to think of Japan :) These flowers, called Sakura in Japanese, have a variety of uses including culinary ones. The flowers are usually white in colour with pale pink near the stems.

And I wanted to give these lovely flowers a try. I found a very simple traditional design for folding these flowers. It involves a little cutting though.

The reason I have made so many of these little flowers is that, I have a project in mind; or rather, my sister-in-law has a project  for which she needs these flowers. Will be posting on that soon :)

Model Details:

Model: Cherry Blossoms

Origin: Traditional

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 2 inches

Model Size: 1 inches

Diagram: Origami-club

Here is the final cube from the book 'Modular Origami Polyhedra'. The Ninja Star Cube is also made from 12 modules. The one I tried is the second cube. This one is a bit more ornate than the original ninja star cube. It has got a couple more folds which gives a little variety to the folds.

Each face of the cube has the shape of the star in the middle. The star is clearer in the next picture.

Model Details:

Model: Ninja Star Cube 

Creator: Lewis Simon

Book: Modular Origami Polyhedra
 
Author: Lewis Simon, Bennett Arnstein, Rona Gurkewitz
 
Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: Square cube with approximate side of 2.25 inches

Modules: 12

Before trying the Ninja Star Modular Cube, I tried out one last cube. This is again from the book 'Modular Origami Polyhedra'. As before, this is from the chapter on Decoration Box System. Almost all the cubes have the same heading, namely, 'Modular Cube', so I am also using the same name :) To be more specific, this is the 8th cube in this chapter. The design is by Lewis Simon.

When I looked at this model, I liked the shape which is different from the usual cube shape. This looks a little like the last modular cube I did, but with more pronounced truncated corners. Assembling the model is different from usual for me. An interesting model to fold :)

Model Details:

Model: Modular Cube 

Creator: Lewis Simon

Book: Modular Origami Polyhedra
 
Author: Lewis Simon, Bennett Arnstein, Rona Gurkewitz
 
Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: Square cube with approximate side of 2.25 inches

Modules: 12

Since making my last cube, I have made a few more cubes from 12 sheets of paper. All are from the book 'Modular Origami Polyhedra' . This one is a Sonobe Cube formed from Decoration Box modules. We start off folding as for the decoration box module and then add a few more folds to get the final module.

I first tried this model from 2-inch squares. Quite a tough job!! Folding these thin creases are quite painful, but not as painful as creasing paper that has already been folded 4-5 times!! My thumb took quite a beating! I would strongly advice a bone-folder for this model. Unfortunately, I don't have one, so had to make do with my poor thumb :(

Model Details:

Model: Sonobe Cube from Decoration Box Modules 

Creator: Lewis Simon

Book: Modular Origami Polyhedra
 
Author: Lewis Simon, Bennett Arnstein, Rona Gurkewitz
 
Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 2 inches

Model Size: Square cube with approximate side of 1.25 inches

Modules: 12

As I had mentioned in my previous post, I tried out the modular cube variation, this one in orange. The assembly is the same as the modular cube. The only change, in fact, is the way the initial fold is done, so that the reverse of the paper becomes visible. So it is a good idea to use paper coloured on both sides, in contrasting colours. I preferred using single-sided orange coloured paper. I think it has turned out quite well :)

But in reality, folding the modules turned out to be an unexpected challenge! I had used the same paper size as in my previous cube (1.25 by 3.5 inches). Unfortunately, this model had a couple of additional folds, resulting in really thin strips. And folding those thin strips in such a small paper turned out to be painful!! I used a ruler to ensure that I got the folds right. Thankfully the paper was quite strong, I am sure I would have ended up tearing quite a few modules otherwise!

Model Details:

Model: Modular Box Variation 

Creator: Bennett Arnstein

Book: Modular Origami Polyhedra
 
Author: Lewis Simon, Bennett Arnstein, Rona Gurkewitz
 
Difficulty Level: Low Intermediate

Paper Ratio: Rectangle in ratio 1:2

Paper Size: 1.25 by 3.5 inches

Model Size: Square cube with approximate side of 1.25 inches

Modules: 12

The decoration and modular boxes from the book 'Modular Origami Polyhedra' are beautiful and very tempting! The boxes are all cubes made from 12 modular units. They are quite easy to make as well. And I love the little windows in the cubes.

I had previously tried out the original decoration box and was quite pleased with the results. This time, I tried out the first of the modular cubes, which is actually a variation of Lewis Simon's decoration box.

This turns out to be much more economical than the decoration box too, since it is made from 12 rectangles in 1:2 ratio (a square cut in two). The decoration box, on the other hand, is made from squares. So you can make 2 of these modular cubes for each of the decoration boxes :) Naturally, the size of the cube is also smaller than the decoration box.

While folding the cubes, the one issue I faced was that, the backside of the paper (white in my case), can be seen peeking out in quite a few places! No matter how I folded it, the white was visible :( I guess paper coloured the same on both sides would have been better.

Well, I will be folding a few more of these cubes. The next variation of the decoration box is the next on my list, followed probably by the Ninja Star cube.

Model Details:

Model: Modular Box 

Creator: Bennett Arnstein

Book: Modular Origami Polyhedra
 
Author: Lewis Simon, Bennett Arnstein, Rona Gurkewitz
 
Difficulty Level: Low Intermediate

Paper Ratio: Rectangle in ratio 1:2

Paper Size: 1.25 by 3.5 inches

Model Size: Square cube with approximate side of 1.25 inches

Modules: 12

 After the tutorial for making the masu box, here is the tutorial for the lid :)

The lid is made from a square the same size as the base. In spite of that, it needs to be slightly larger than the base so that it fits well. And I like my lid to be of a lesser height, so that it is easy to open the box. So with a few changes to the masu box, here is the masu lid! :)

I have explained in a lot of detail, so that all steps are clear. So though it make look like a lot of steps, it isn't very difficult to do. Please drop a comment if any step is unclear.

Time Required: ~10 minutes
Difficulty Level: Simple
What is needed: 

• 2 squares of paper, both measuring around 8 inches.
• Pencil or pen to make some markings
• Paper clips
• Glue

How to Fold:

1. The green square is the one that will be used for the lid.

2. Follow Steps 3 to 7 in the masu box tutorial, so that all four corners are folded to the centre.

3. Unfold the masu box completely and fold the four corners to the centre. The yellow one is the unfolded masu box. We need this so that we can fold the lid slightly larger than the base.

4. Place the 2 pieces face-to-face so that the folded corners are inside. We are going to align the pieces so that the folded edge of the lid lines with the first crease of the base (marked with a dotted line in the base).

5. Align the lid exactly on top of the base, as shown. Use a paper clip to hold the pieces in place. Once you get the hang of this, you will no longer need the paper clips :)

6. Turn it over so that the base sheet comes on the top and the lid at the bottom.

7. Now fold the part of the lid that is projecting out, over the base. You will notice that the edge of the lid does not line up correctly with the crease in the base. This will ensure that the lid is just a tad bigger than the base. Repeat Steps 5 to 7 for the remaining 3 edges.

8. Open up completely and place the paper so that the coloured side is facing you.

9. Fold in half so that one edge meets the other but don’t crease fully. Only crease from the edges to the next crease. Repeat for the other edge.

10. Unfold and turn over so that the white side faces you.

11. The next crease is going to be made using the 2 consecutive creases, marked in Step 11.

12. Fold and align the marked creases, so that you have a new crease mid-way between them. This will be the actual height of the box. You can play around with this fold, to make the lid a little taller or shorter than this. Repeat the fold for the other 3 sides.

13. Open up. You have now made all the creases necessary for folding the lid.

14. You can reinforce the crease made in Step 12 to ensure that the sides of the lid is sharp.

15. Fold opposite corners as shown and life up to form 2 sides of the lid. The corners will not meet in the centre, as in the base, but rather, will overlap and touch the opposite edge.

16. Now, the steps are the same as the base. Push in the the corners on the third side. The paper will naturally fold in on existing creases. Use paper clips, if required, to hold in place.

17. Fold down inside and crease well. 3 sides now completed.

18. Repeat on the 4th side. Crease the edges well. Since the sides are shorter than the base, you will need to glue down the parts that were folded in.

19. Refold your base. Cover the base with the lid, it should fit perfectly :)