If you are familiar with folding the traditional origami crane and the origami Kawasaki rose, then why not try out the Origami Tsuri Rose - a modified crane with a rose in the centre.

The tsuru rose has been on my to-do list for quite some time. And finally I was able to try it out - mostly because the monthly theme at the Origami Society of Madras is a crane and I didn't want to end up folding the traditional crane :)

The crane is not easy to fold - I would rate it as a high intermediate. And the reason for is, once the pre-creasing is over, immediately on starting the folds, the model becomes 3D. So almost from the beginning (Step 10 in the diagram), we end up folding in the air. And as the folding progresses, there are quite a few layers of paper to fold, which makes it harder to fold or get crisp creases. And getting a good, well-creased crane without crushing the rose in the centre was pretty challenging for me. That said, after I had tried it a couple of times, I was quite happy with the outcome :)

Model Details:

Model: Tsuru Rose

Creator: Satoshi Kamiya

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 6 inches

Model Size: ~ 5 inches wingspan and 4 inch from head to tail

Instructions: Coisas de papel

I love reading and, consequently, love collecting bookmarks. But since it was Valentine's Day a couple of days back, I wanted to make heart shaped bookmarks. So off I went, making a whole bunch of these heart bookmarks for everyone I know! Wonderful V-Day gift for a book lover, huh?

The bookmarks are pretty easy to make, thanks to the tutorial by Jo Nakashima, who is also the creator of this model. They are made from a rectangle in the ratio 1:2 but from the tutorial, I understand any rectangle will work just fine.

Model Details:

Model: Heart Bookmarks 

Creator: Jo Nakashima

Difficulty Level: Low Intermediate

Paper Ratio: Rectangle

Paper Size: 6 * 3 inches

Model Size: ~4.5 inches long by 1 inch heart

Tutorial: Youtube

Valentine's Day - a very nice time to make origami hearts! So I found these easy hearts, which take about 5 minutes to complete :)

I had intended to make these hearts as covers for a couple of boxes that I had, so I made them from big, 6-inch paper. I love polka dots, so I had this lovely red, polka dot wrapper paper which I was able to use now. This paper is a little thicker than the 80 gsm printer paper, which made it very good for this heart.

Now, all I need to do is fix them on top of 2 boxes that I am making for my husband and my daughter. And I am all set for Valentine's Day!

Model Details:

Model: Hearts 

Creator: Haui Boglárka

Difficulty Level: Simple

Paper Ratio: Square

Paper Size: 6 inches

Model Size: 5 inches across and 4.5 inches in length

Instructions: Zsuzsiorigami  (no longer available)

Tutorial: Youtube

After folding the octagonal box from 4 units, I tried the 8-unit box. While folding, I realized that the 4-unit version is actually an extension of the 8-unit box. So folding the individual modules was pretty easy.

The assembly was not as easy as the 4-unit box. Mainly because there are 8 arms that have to be folded together to form the spiral at the top. And obviously, dealing with 4 spiral arms was way easier :)

I had used 3 inch squares to make the modules. So the result was a fairly small, octagonal box which is the perfect size for gifting jewelry in.

Model Details:

Model: Octogon Box 

Creator: Tomoko Fuse

Book: Let's Fold Spirals
 
Author: Tomoko Fuse
 
Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: ~ 2.5 inches across and 1.25 inches tall (including spiral)

Modules: 16 (8 for base and 8 for lid)

Of late, I have been making paper reeds in the fond hopes of making a bowl. I had previously made a paper woven bowl and basket and after coating it with a mixture of fevicol and water, I have found it to be quite robust!

Since rolling the paper reeds was the most time consuming part of making the bowl, I have been making these reeds as and when time permitted. So finally, when I had about 100 of these reeds, I figured it was time to make my next bowl.

This bowl is larger and more sturdy than my previous one. I have still not learnt how to end the bowl! I had no clue what to do at the end, so finished it rather abruptly!

A lot more practice is required, if I wish to end up with a smoother, more refined finish. Starting the bowl requires more precision. It is difficult to hold all the strands at the beginning and as a result, the beginning isn't very smooth. The sides were pretty easy to do, except for the end of course :) Over all, am neither happy nor unhappy with my effort.

If you would like to give these paper weaves a try, this video should be of help. The language is not English, but the video is still very useful 😊
SaveSave

This month's theme at the Origami Society of Madras is Boxes! Yay! Love it :)

So I got cracking with this octagonal box by the ever-prolific Tomoko Fuse. I have this absolute fascination for boxes with spirals. I am always astounded by how beautifully elegant they look! So I worked on this spiral box from Tomoko Fuse's 'Let's Fold Spirals'.

A couple of years back, I had completed yet another spiral box - a hexagon and I love that box. I still have it and it is still as sturdy as ever. The octagon box, though, isn't as sturdy as the hexagon box because of the way it is constructed. This box is made from 4 modules for the lid and 4 for the base. And each module forms 2 sides of the octagon.

I had used 80 gsm paper (love the rather Christmassy look that the red/green combination brings in!) which gave stability to the box. Thicker paper should work much better though.

Model Details:

Model: Octagonal Box with Spirals 

Creator: Tomoko Fuse

Book: Let's Fold Spirals
 
Author: Tomoko Fuse
 
Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 5 inches

Model Size: ~4 inches across and 2 inches tall (including spiral)

Modules: 8 (4 + 4)

The Origami Society of Madras has started a recent project - to fold as many models as possible, based on a particular theme and post it on the group's Facebook page. The theme is selected via voting and this month's theme has been Dragons.

If you go through my posts, you will quickly realize that I have a general aversion towards folding life forms - I have about 50 posts on lifeforms as opposed to 120 posts on modular origami! But I did want to take part in this initiative, so finally, on the very last day of this month's theme, I tried out Robert Neale's origami dragon.

The dragon is fairly easy to fold, easier to fold when using thin paper (60 gsm or lesser). I had used 80 gsm paper, so the feet of my little guy don't look too good, in spite of putting my bone-folder to good use!

I started with a 4.5 inch square and the final dragon measured about 1.5 inches tall and 2.25 inches across.

Model Details:

Model: Dragon 

Creator: Robert Neale

Book: Origami Monsters and Mythical Beings
 
Author: Jay Ansill
 
Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 4.5 inches

Model Size: ~1.5 inches tall and 2.25 inches across

Tutorial: Youtube