In preparation of Valentine's Day next month, I thought I would try out something new. The Kawasaki rose has always been challenging for me, so I decided to make it even more challenging by making a rose ring using the same rose.

I have tried out the rose ring before, but I wasn't too happy with the way it turned out then. But after some practise and some fails, here is one I absolutely love. Goes to a good friend of mine too. Hope she likes it 😀

The paper I have used is pearlized washi paper in a soft peach colour with tinges of gold woven into the paper. The final ring was glazed to strengthen it.

The yellow rose is another one I made using similar paper. I used a bronze ring, which I thought went better with the rose. This was even more challenging, since the paper was smaller than the peach ring. But well, I am happy with the final outcome!! 😃

Model Details:

Model: Rose Ring 

Creator: Toshikazu Kawasaki

Book: Origami Dream World - Flowers and Animals
 
Author: Toshikazu Kawasaki
 
Difficulty Level: High Intermediate

Paper Ratio: Square

Tutorial: Youtube

Tomoko Fuse's book 'Unit Origami Fantasy' is in Japanese, so I am not able to find the name of this model! Hence the generic title for the post :) Do leave a comment if you are aware of the name of the model. Though the book is in Japanese, the detailed step-by-step instructions are more than enough to complete the models.

As far as the model goes, this is a simple model, made from a windmill base. I used printer paper (80 gsm) for the units, which turned out pretty good for this model. I think if I had used regular 60 gsm origami paper, the model might not have been as sturdy. For a sturdier model, thicker paper such as scrapbooking paper should work well, given the simplicity of the folds and the assembly.

In general, for modular origami, I tend to go for the icosahedron assembly (30 unit assembly). But for a change, I tried the cube assembly (12 unit assembly). Each face is made from 4 modules and there are a total of 6 faces to the cube.

Model Details:

Model: Cube Modular 

Creator: Tomoko Fuse

Book: Unit Origami Fantasy
 
Author: Tomoko Fuse

Language: Japanese
 
Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: ~3 inches

Modules: 6

I am quite fascinated with Tomoko Fuse's book 'Floral Origami Globes' and after completing the Butterfly Kusudama, I didn't waste much time, working on the next kusudama.

This kusudama is the Chrysanthemum Globe Kusudama, assembled from 60 rectangles. Each unit is assembled from 2 rectangles - a base and the chrysanthemum, inserted into the base.

The kusudama assembly is the basic sonobe assembly for 30-unit icosahedrons, but with a small difference. While the sonobe assembly is in a clock-wise direction (the pockets open to the right and the tabs go into these pockets), the chrysanthemum assembly is anti-clockwise - that is, the tabs are inserted into pockets that open to the left.

The chrysanthemum unit has multiple layers of paper in the central petal, so thin paper works better. I have used regular copy paper and had to be extra careful when folding it so that it did not tear in the middle.

Model Details:

Model: Chrysanthemum Globe Kusudama 

Creator: Tomoko Fuse

Book: Floral Origami Globes
 
Author: Tomoko Fuse
 
Difficulty Level: Low Intermediate

Paper Ratio: Rectangle in ratio 1:2

Paper Size: 4 inches by 2 inches

Model Size: ~5 inches in diameter

Modules: 30

Tutorial: Youtube 

Recently I had purchases some earring bases shaped like little bird cages, complete with birds too! So decided to use them to make some pretty origami earrings, with little stars in them.

Tried out a couple of colours and options and I must admit my favourite are the literary stars, made from the pages of an old book. Love the idea of recycling as well and these were so cute that they got sold out pretty fast!

The next option was using momigami paper. The crinkly texture of this paper adds an interesting dimension to the stars I thought. The royal blue earrings are made from this paper.

Finally I tried regular origami paper to make the brown stars. These stars blended well with the earring base. And once glazed, they had a nice shine to them too!

What do you think? Which are your favourites?

It has been quite a while since I folded modular origami and even longer since I folded any of Tomoko Fuse's amazing creations. This modular kusudama is the Butterfly Kusudama (Type III) and is from the book 'Floral Origami Globes'.

The model is made from 30 units and each unit is made from 2 rectangles. The fan-like section is folded into a base section to form 1 unit. I have glued the two parts of the fan, but as per the instructions, they are left as-is to represent the 2 wings of the butterfly.

Model Details:

Model: Butterfly Kusudama 

Creator: Tomoko Fuse

Book: Floral Origami Globes
 
Author: Tomoko Fuse
 
Difficulty Level: Low Intermediate

Paper Ratio: Rectangle in the ratio 1:2

Paper Size: 3 inches by 1.5 inches

Model Size: ~4 inches in diameter

Modules: 60

Happy New Year, dear readers! 😊

I haven't been the most regular blogger these past few months, but I have been quite busy, making paper products, rather than working on origami! I make paper bags and pillow boxes and of late, this has been quite popular on my Facebook Page. So I have been inundated with orders to make these bags and boxes.

In addition to this, I have also been working on my origami jewelry. My favourite and most time-consuming one has been these leaf earrings. Each cluster is made up of 15 leaves, each leaf measuring 0.5 inch in length. Folding these leaves was an amazing lesson in patience! I worked completely with tweezers and tooth picks, for a total of 3.5 hours, to make these earrings. The earrings measure about 2.5 inches in length and are super-light.

Another personal favourite is the leaf earring. I love that these earrings can be made in a wide range of colours - washi and chiyogami paper is the best since it has the best print for these earrings. These earrings are delightfully unique and are sure to be conversation starters!

In addition to origami jewelry, I have been making quite a few paper bags, from handmade paper and scrapbooking paper. These bags measure 6*4 inches in size and are very colourful to look at. Every time I make these bags, I have to force myself to give them to my clients! With Valentine's Day just round the corner, I am now making valentine-themed bags, which look absolutely adorable :) More pictures on my Facebook Page. 

And finally, pillow boxes are also in demand. Right now, I am working on an order to make 50 boxes. Making such large quantities of handmade goods is tiring, which I am learning to my dismay! But these boxes are perfect for small gifts like jewelry, and add a beautiful touch of elegance, even to the simplest gifts. So I think I will get a whole lot more orders and I better find out more efficient ways of making them!

Finally, I am trying to understand Google+ pages. I have now created a page for Paper N Pearlz. I am yet to understand the repercussions of claiming a custom URL, though I do understand that Google can make it chargeable in the future. If you are on Google+, please do +1 Paper N Pearlz. I have also added a Google+ badge at the top of the page and hopefully that should make the process easier 😊

And with that I come to the end of my first post for this new year :)

With Christmas just round the corner, there is no better time to fold Santas, is there? I tried this Santa because of how natural he looks. I think all that this Santa is missing, is his big sack of toys!

The model has been adapted by Steve and Megumi Biddle, from the original one created by Steve Casey, and can be found in the book 'Essential Origami'. This book is a good place to start for beginners and the Santa is one of the more advanced models.

This Santa cannot stand by himself, so I added wire loop to his cap, and now he occupies his own special place on our Christmas tree!

Model Details:

Model: Santa Claus

Creators: Steve and Megumi Biddle

Book: Essential Origami

Authors: Steve and Megumi Biddle

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 6 inches

Model Size: ~3.5 inches