After working on the 4th variation in the last post, I decided to try out one final variation of the octagonal boxes from Tomoko Fuse's 'Joyful Origami Boxes' before moving on to other models.

Yet again, I decided to use my double-sided paper - in this case, paper that is blue on one side and printed with little flowers on the other. And yet again, only the final module is provided and it is up to us to figure out the method to fold. This is the 1st variation on page 72.

Each paper square that I have used is 3 inches in size and the end result is an attractive box, about 2.5 inches across. For the base, instead of using the same double-sided paper, I used blue 3-inch squares of printer paper. That ensured that the base was very sturdy.

With this, I am done with the boxes from Joyful Origami Boxes. I will definitely revisit this book at a later date, since it still has a number of lovely boxes for me to try out 😃

Model Details:

Model: Octagon Box - 1th Variation

Creator: Tomoko Fuse

Book: Joyful Origami Boxes

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: 2.5 inches across

Number of Modules: 16

This absolutely stunning variation of the Octagonal box from Tomoko Fuse's 'Joyful Origami Boxes' is my third attempt at folding the octagonal boxes. Each of these boxes that I have folded, I feel, is prettier than the previous one!

For this origami, I used some of my precious supply of double-sided paper - paper that is plain coloured on one side and printed with little flowers on the other. I absolutely love this paper and tend to use it very, very judiciously.

Page 72 of the book gives the directions for folding the variations - that is to say, Tomoko Fuse gives us the final module and it is left to us to figure out how to arrive at the module. But given that she has already described the makings of 4 other octagonal boxes, this is not that tough a challenge. A little bit of fiddling around using existing steps should bring us to the module.

Each paper square that I have used is 3 inches in size and the end result is an attractive box, about 2.5 inches across. The picture above shows the inside of the lid, which I think is as pretty as the outside! For the base, instead of using the same double-sided paper, I used red 3-inch squares of printer paper. That ensured that the base was very sturdy.

By the way, this module is the 4th variation shown in the book. I hope to try out more of the variations in the coming days.

Model Details:

Model: Octagon Box - 4th Variation

Creator: Tomoko Fuse

Book: Joyful Origami Boxes

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: 2.5 inches across

Number of Modules: 16

Well, after completing the Plain Octagon Box from last week, I couldn't wait to try one more of the boxes from Tomoko Fuse's 'Joyful Origami Boxes'. 

This time, I tried out the Double Pinwheel box described on page 70. For the assembly, I tried the second assembly, since I wanted the back of the paper to be visible as much as the front. The folding and assembly are not too difficult.

So now, I just have to try the variations on Page 72 😊

Model Details:

Model: Octagon Double Pinwheel Box

Creator: Tomoko Fuse

Book: Joyful Origami Boxes

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3.5 inches

Model Size: 3.5 inches across

Number of Modules: 16

'Joyful Origami Boxes' by Tomoko Fuse is an amazing book if you like folding origami boxes. I had previously tried out a couple of the models from the book - The Heptagon Starry Pinwheel Box and the Hexagon Pinwheel Box. But this was way back in 2011, so when I got another opportunity to fold something from this book, I decided to try out the Octagon series.

Similar to the Hexagon and Heptagon boxes, Tomoko Fuse has given detailed instructions for making quite a few Octagon boxes - Pinwheel, Flowery Pinwheel, Starry Pinwheel and Double Pinwheel are some of the variations she has detailed in the book.

What I have folded is the Octagon Box - Plain, found on page 69. The folding is pretty straight forward and as always, steps are accurately described. Assembly was also fairly easy. I used coloured printer paper, so that the box is nice and strong.

I do hope to fold more of these boxes in the coming days. Page 72 gives a list of variations on the Octagon Box and this is something I absolutely want to try.

Model Details:

Model: Octagon Plain Box

Creator: Tomoko Fuse

Book: Joyful Origami Boxes

Author: Tomoko Fuse

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3.5 inches

Model Size: ~3.5 inches across and 0.75 inches in height

Number of Modules: 16

The hexagon pinwheel box is a design by Tomoko Fuse, from her book 'Joyful Origami Boxes'. It is made from 6 squares of paper and joined without glue.

The lid looks best when folded with duo coloured paper. But I think it looks great when folded from any dark-shaded wrapper paper too.

And as in most cases, I did use wrapper paper to fold this box :) I love the variety offered by the paper and always prefer using it to any solid coloured paper, especially for boxes.

Model Details:

Model: Hexagon Pinwheel Box

Creator: Tomoko Fuse

Book: Joyful Origami Boxes

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 5 inches

Tutorial: Lid, Base

Number of Modules: 12