So I have been experimenting with making some woven products using the original newspaper tubes, without colouring them. 

This was the first of them - a pen or pencil pot. This time I tried both ways - one I made using only the newspaper tubes, no colour. The next was made from wood-coloured tubes. What do you think? Which is the one you prefer?

Personally, I prefer the original tubes with no colour. I like that the paper is seen and anyone seeing it would know that it is made from paper. But if I want to hide that it is actually paper-made, then the colouring one works out well.

Here's to a blessed new year 2021! Well, the year has had a good start for me and I was able to work on my first order for this year - a box made from newspaper tubes with a touch of decoupage. 

I am very happy to see the results of all the practice I have had during these past few months! Quite delighted with how pleasing and utilitarian this box turned out to be! 

The box is 8 inches in diameter and 10 inches in height. In this instance too, the client just specified that she wanted a big box with decoupage. So that meant, I got to choose the colours and the design!! Yay!!

 

I went for the peach/white combination from my last box as I absolutely love this decoupage tissue. I love how pleasing these roses are! The base was made from a cardboard and I started by gluing the sticks to the base. 

I used 2 patterns for the sides. The first was a 3-weave pattern as I wanted to accentuate the white. This was followed by a peach section, since I wanted the decoupage to stand out here. 

The lid also started with a cardboard base with decoupage on it. Quite happy with the way the decoupage turned out! In love with these little woven knobs! They are so adorable!!

Finally, I finished off with some round felt protectors, since the colour is quite light and I didn't want the box to turn dirty very quickly! 

So, here's to a year of newspaper weaving and plenty of orders 😄😄

Happy New Year 2021!

 

A little origami modular to start the New Year 2021! Happy new year! 

This nice little modular, called Origami Rain Star is designed by Aldo Marcell. I have folded a couple of his models before - the Origami Tornado and the Origami Cyclon. And so I was quite excited and scared of folding this one! The Origami Cyclon was really a difficult one to fold! But this turned out to be a joy to fold and assemble and very economical to boot! 

This model is folded from a rectangle 1:3 in ratio. So I used double sided origami paper, 7.5 cms in size. I divided the paper into 3, so the pieces I ended up with were 2.5 cms by 7.5 cms. The individual modules were quite easy to fold. And the assembly was also surprisingly easy!

 What surprised me the most about this model was the size of the finished model. 1-inch by 3-inch rectangles, I expected a small model. Turns out this model was quite different! The final model measured approximately 4 inches in diameter.

Double-sided paper works best and I love the way those little stars show up when the modules are assembled. 75 gsm origami paper works best for sizes that I usually fold. 

Model Details:

Model: Rain Star

Creator: Aldo Marcell

Difficulty Level: Low Intermediate

Paper Ratio: 1:3

Paper Size: 1 inch by 3 inches

Model Size: ~4 inches in diameter

Modules: 30

Instructions: Stranamasterov.ru

Tutorial: Youtube