I have started the year 2018 with a bang! I completed my first paper weaving project (a magazine holder) and here is my first origami of this year. This model is one of Tomoko Fuse's kusudamas, named Fuufuki Asagao Kusudama. It is taken from her book Unit Origami Fantasy. 

The kusudama is made from 30 smaller squares, folded and assembled together (I did the assembly with glue). I used fairly thick paper, by origami standards - 80 gsm regular printer paper, cut into 3*3 inch squares. I am not sure 60 gsm paper would have worked quite so well. 

What I loved about this kusudama was its angular, sharp appearance, something you don't usually see in kusudamas. Kusudamas, I think, are usually more flowery, soft and flowing. But here, I love the sharp dips that reveal the stars and the triangular peaks that remind me of Fuse's Little Turtle kusudama. 

Model Details:

Model: Fuufuki Asagao Kusudama 

Creator: Tomoko Fuse

Book: Unit Origami Fantasy
 
Author: Tomoko Fuse
 
Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inch squares

Model Size: ~5 inches in diameter

Modules: 30

Tutorial: Youtube 

Happy New Year 2018! 365 new days, 365 new opportunities. Here's to hoping that we make good use of it. 

My first project this year is a woven magazine holder. This project has been in the works for a couple of months now - mainly because I wanted a very sturdy base, so that the holder would not topple over once a few magazines were placed. So after trying out a woven base followed by a cardboard base, I finally decided to use a wooden base - got a carpenter to cut out a 10 inches by 4 inches plywood and drill holes into it. I spaced the holes 1.5 cms apart. Then I covered it will some pretty paper that I had from one of my old origami projects. I hope you are able to make out the lined based in the pictures below. 

Naturally I used the colours from the base for the tubes as well - cream, light green and pink. The cream was the dominant colour and the light green was sparingly used. 

I also wanted to try out different types of weaving, so I ended up using this opportunity to do just that. The bottom most weave is the standard Rope Weave. This is the one that is the easiest for me. And I think this comes out the best, if I say so myself :) 

The next layer is for the Cotton Weave. This is generally the easiest weave. The one that everyone tries out first. But for some reason, I still haven't got the hang of this one! And I am still not comfortable with the weave. 

The third layer is a type of Openwork Weave. Not clear on the name. I used a mix of green and cream for this layer. This weave looks much better if this is the only pattern used, but mixed amidst all the other layers, I guess it loses the appeal. 

Finally, the last layer is the reverse rope layer. Since I needed to go back and forth with weaving this layer, this seemed the most practical. 

Tutorial links: 

Rope Weaving

Cotton Weaving

Openwork Weaving

I guess my post has been sufficiently long for the first post of the new year! Hope I get to make many more of these holders :)