For the very first time, Little Miss went on a trip without me! She had gone on a weekend trip with her grand parents and her uncle's family. Well, more heart-rending for the mom than for the daughter, I think! 😆

Anyway, during this trip, my wonderfully thoughtful little girl decided to buy something for my husband and for me. She put in a lot of thought into the gifts and we feel blessed to receive them. For my husband, she got a shirt in his favourite colour and for me, she bought some gorgeous origami washi paper in a variety of colours! I am truly touched.

So such a thoughtful gift required a well thought-out origami. So after a lot of research - and I assure you I did quite a bit of research - I decided to make this beautiful pyramid box by the wonderfully amazing Tomoko Fuse.

Absolutely love the way it has turned out. And Little Miss also liked what I finally came up with :) The model is taken from the book 'Origami Boxes' by Tomoko Fuse and is published by Tuttle Publishing. The first part of the book starts with a lot of variations to the traditional Masu box, followed by the Pyramid Box and finally, the Dome Box. Part 2 deals with modular boxes from square sheets of paper. Finally, Part 3 deals with modular boxes made from rectangular sheets of paper. It is a very good book, I thought, with a lot of colourful pictures to help one visualise better.

As for the Pyramid Box, each box is made from 2 sheets of origami paper, 6 inches squares. The steps are not very difficult to follow, though the final collapse when making the lid might prove a little challenging initially. A variation is also shown for the lid - that is the yellow box in the picture above. For the base, Tomoko Fuse has also kindly provided instructions for increasing the size of the base and also instructions to make it more sturdy. The base is, of course, easier to make than the lid.

Altogether, a good origami project to work on and I thought, a fitting use of some lovely washi paper.

Model Details:

Model: Pyramid Box

Creator: Tomoko Fuse

Book: Origami Boxes

Author: Tomoko Fuse

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 6 inches

Model Size: 2.5 inches across and 2.5 inches in height

After folding the Jaciara from the book 'Modern Kusudama Origami' by Ekaterina Lukasheva, I decided to give it another go. Only this time I tried out one of the variations of the model. And I used a smaller square, since I wasn't too happy with how big my previous model turned out to be!

This variation is the second variation for the model. The author states that the variation seems pointless till you open up the petals. And while this might be true, I must say I adored this model even in the closed-petal state! I quite liked the elegance of the closed kusudama.

But of course, when you open up the petals, it really looks like a blossomed flower. Be sure to use double-sided paper, so that the print on the other side becomes visible when it is opened.

The Jaciara is the last model in the book. There are 2 variations and another couple of Jaciara variables. Hopefully I will get a chance to try some more of these models in the future.

Model Details:

Model: Jaciara - Variation 2

Creator: Ekaterina Lukasheva

Book: Modern Kusudama Origami

Author: Ekaterina Lukasheva

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 2 inch squares

Model Size: ~2.5 inches in diameter

Modules: 30

After working on the 4th variation in the last post, I decided to try out one final variation of the octagonal boxes from Tomoko Fuse's 'Joyful Origami Boxes' before moving on to other models.

Yet again, I decided to use my double-sided paper - in this case, paper that is blue on one side and printed with little flowers on the other. And yet again, only the final module is provided and it is up to us to figure out the method to fold. This is the 1st variation on page 72.

Each paper square that I have used is 3 inches in size and the end result is an attractive box, about 2.5 inches across. For the base, instead of using the same double-sided paper, I used blue 3-inch squares of printer paper. That ensured that the base was very sturdy.

With this, I am done with the boxes from Joyful Origami Boxes. I will definitely revisit this book at a later date, since it still has a number of lovely boxes for me to try out 😃

Model Details:

Model: Octagon Box - 1th Variation

Creator: Tomoko Fuse

Book: Joyful Origami Boxes

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: 2.5 inches across

Number of Modules: 16

This absolutely stunning variation of the Octagonal box from Tomoko Fuse's 'Joyful Origami Boxes' is my third attempt at folding the octagonal boxes. Each of these boxes that I have folded, I feel, is prettier than the previous one!

For this origami, I used some of my precious supply of double-sided paper - paper that is plain coloured on one side and printed with little flowers on the other. I absolutely love this paper and tend to use it very, very judiciously.

Page 72 of the book gives the directions for folding the variations - that is to say, Tomoko Fuse gives us the final module and it is left to us to figure out how to arrive at the module. But given that she has already described the makings of 4 other octagonal boxes, this is not that tough a challenge. A little bit of fiddling around using existing steps should bring us to the module.

Each paper square that I have used is 3 inches in size and the end result is an attractive box, about 2.5 inches across. The picture above shows the inside of the lid, which I think is as pretty as the outside! For the base, instead of using the same double-sided paper, I used red 3-inch squares of printer paper. That ensured that the base was very sturdy.

By the way, this module is the 4th variation shown in the book. I hope to try out more of the variations in the coming days.

Model Details:

Model: Octagon Box - 4th Variation

Creator: Tomoko Fuse

Book: Joyful Origami Boxes

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: 2.5 inches across

Number of Modules: 16

The strawberry wreath is a simple variation of the origami traditional 16-pointed star. While the original star is single-coloured, this variation is double coloured and looks good with double-sided paper. The moment Little Miss saw the strawberry colours I had used for this star, she decided that it should be named the Strawberry Wreath :)

I have been meaning to make a tutorial on one of the traditional origami designs and have now revised the plan and decided to make one on this variation. So hopefully soon, I should have my next tutorial ready :)

Model Details:

Model: Strawberry Wreath

Origin: Traditional

Difficulty Level: Simple

Paper Ratio: Square

Paper Size: 3.5 inches

Model Size: ~6.5 inches in diameter

Modules: 16

Tutorial: Youtube 

These origami star containers, that can double as vases, are a great traditional origami to fold. They are made from a single square sheet of paper, the thicker the better. I had initially tried mine with origami paper and then with regular copy paper. The copy paper one turned out to be much more sturdy. The folds are quite simple and starts from a square base.

They are great for storing little knickknacks. I filled up mine with little glass stones. They will also make great vases, though the mouth is a little wide, so you will need to either fill it with a whole lot of flowers or insert a small holder. Since a vase looks better if it is long, ensure that the last fold (before it is shaped out) is made smaller.

Model Details:

Model: Star Container 

Origin: Traditional

Difficulty Level: Simple

Paper Ratio: Square

Paper Size: 8 inch squares

Model Size: ~3 inches in diameter and 2 inches in height

Tutorial: Tweety Atelier

Tutorial: Youtube