Showing posts with label flower. Show all posts
Showing posts with label flower. Show all posts

The Estrella Flor Kusudama is a modular origami created by Erny. Like my previous post, the Mt. Fuji Kusudama, the essential shape of this model is also a sonobe. And to form the sonobe modules, a total of 30 squares of paper is required. It works best if we use 15 squares of 1 colour and 15 squares of a second contrasting colour. That will bring out the flower pattern very well.

Each of the 15 squares are cut into 2 rectangles of ratio 1:2. So finally, to make the model, we will be folding 60 modules. 30 of these modules will form the flower shape and the other 30 will form the sonobe shape. The flower modules are slotted into the sonobe modules before starting the assembly. While the task seems quite daunting, the folding is not very difficult, though a little time consuming. Assembly is the usual sonobe assembly - 3 pyramids grouped in clusters of 5.

I quite like the colour choice I had made - dark purple and a light violet (or would that be mauve?) The final model is not too large, since I had used 7.5 cms squares. I decided to make it into a hanging ornament, so ended up with tassels and some beads to form the ornament.

Model Details:

Model: Kusudama Estrella Flor 

Creator: Erny

Difficulty Level: High Intermediate

Paper Ratio: 1:2

Paper Size: 3 inches by 1.5 inches

Model Size: ~4 inches in diameter

Modules: 60

Instructions: Folding in the air

Tutorial: Youtube

Restarted folding some models from Ekaterina Lukasheva's book 'Modern Kusudama Origami'. The model I tried now is titled 'Serenade', found on page 28.

The modules are pretty easy to fold. Either 12 modules or 30 modules are needed for assembly. As always, I did the 30-unit Icosahedron assembly.

The instructions suggest using origami paper with colour gradient. Surprisingly, I did have such paper, so I went right ahead and used it! And as can be seen, the paper is lighter at the centre points and gradually get darker near the curls.

The other models I have folded from this book are Rio and Centaurea Cyanus.

Model Details:

Model: Serenade 

Creator: Ekaterina Lukasheva

Book: Modern Kusudama Origami

Author: Ekaterina Lukasheva

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inch squares

Model Size: ~4 inches in diameter

Modules: 30
The next model that I tried from my recently bought copy of Ekaterina Lukasheva’s new book ‘Modern Kusudama Origami' is the Centaurea Flower. It is a very pleasant looking model which requires duo-coloured paper. I used paper that was solid pink on one side and had little flowers on the other.

The model was of intermediate difficulty. I liked the way the petals shaped up. While the suggested paper size was 7 cms, I used 7.5 cm squares. The end result was a kusudama ball, about 5 inches in diameter.

Model Details:

Model: Centaurea Cyanus

Model: Ekaterina Lukasheva

Book: Modern Kusudama Origami

Author: Ekaterina Lukasheva

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: 5 inches diameter

Number of Modules: 30

My daughter, Little Miss, has recently become very keen on recycling and reusing whatever she can. So when I was recently asked to make a few origami lotuses, she came up with the idea of making literary lotuses! And we are both delighted with the way the lotuses turned out. We initially tried a complete literary lotus - that is, the flower and the leaves were an old book paper. But our second attempt - book paper lotus with green copy paper leaves were more to our liking.

One thing I did find was that, the book paper is much thinner than the copy paper - which meant pulling out the petals had to be done with more care, else we risk tearing the paper. And since the paper was thinner, the literary lotus turned out a little smaller than the one made entirely from copy paper.



Model Details:

Model: Lotus

Origin: Traditional

Difficulty Level: Low Intermediate

Paper Ratio: Rectangle

Paper Size: 3 inches * 5.2 inches

Model Size: ~4 inches

Modules: 12

Tutorial: Youtube 

Since of late I have recently been working on easy origami, I thought I would try out something a bit more challenging. This hydrangea cube was a good attempt and I am quite pleased with how it has turned out 😀

How to go about this? Well, we need to initially make 6 of Shuzo Fujimoto's hydrangea tessellations. In origami, tessellations are patterns that are usually folded from a single sheet of paper, that repeat themselves as many times as needed. They usually provide a dimensional appearance.

The hydrangea tessellation is one of the simpler designs. The paper that I have used is regular kami paper. The paper didn't tear while making all those sinks and pops!

Once the 6 hydrangeas are completed, it is just a matter of joining them in a cube. Joins are made by creasing a mountain fold along each of the longer petals, on all 4 sides. The creased corner can be slid into the adjacent hydrangea to hold it in place. Fitting the last of the 6 turned out to be very frustrating and I almost tore up the model! Only the thought that I would have to refold 6 hydrangeas, kept me from doing it!! 😄😄

And if you are the adventurous sort, you can also try the regular snooze assembly, made from 30 units!

Model Details:

Model: Hydrangeau Cube 

Creator: Shuzo Fujimoto

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 8 inches

Instructions (for making a single hydrangea tessellation): British Origami

Tutorial: YouTube

Modules: 6


The origami lotus is yet another traditional, modular model and one that I had tried out recently. The assembly for the lotus is different from what I had done till date.

After folding the individual modules (there are a total of 8 modules for the flower and 4 for the leaves), we assemble the modules in sets of 3 (2 flower modules and 1 leaf module) and tie them together. Once everything is held tight in place, then we start forming the petals and leaves.

The beauty of the flower lies in the way the petals are shaped. The inner petals can be closed into the centre to give the appearance of a flower just starting to bloom. I think mine has the look of a fully opened flower.

Altogether, an interesting and ingenious model to fold.

Model Details:

Model: Lotus

Origin: Traditional

Difficulty Level: Low Intermediate

Paper Ratio: Rectangle

Paper Size: 5.5 inches * 3.5 inches

Model Size: ~4 inches

Modules: 12

Tutorial: Youtube 

Cherry blossoms are beautiful flowers that grow in abundance in Fall. When one thinks of a cherry blossom, one tends to think of Japan :) These flowers, called Sakura in Japanese, have a variety of uses including culinary ones. The flowers are usually white in colour with pale pink near the stems.

And I wanted to give these lovely flowers a try. I found a very simple traditional design for folding these flowers. It involves a little cutting though.

The reason I have made so many of these little flowers is that, I have a project in mind; or rather, my sister-in-law has a project  for which she needs these flowers. Will be posting on that soon :)

Model Details:

Model: Cherry Blossoms

Origin: Traditional

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 2 inches

Model Size: 1 inches

Diagram: Origami-club

Yuri Shumakov's origami vase is folded from a single sheet of paper and has a very realistic look to it. A good amount of pre-creasing is required before the vase is folded into shape. Though it is challenging, it a good origami to do.

I used a 80 gsm A4 sheet cut into a square. So the size was roughly 8.2 inches square. The model works best with thick paper - but not too thick though, since there is a lot of creasing to do. 80 gsm is ideal I thought. Regular 60 gsm origami paper might not be sturdy enough, once completed.

Model Details:

Model: Vase

Creator: Yuri Shumakov

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 8.2 inches

Model Size: 3.75 inches in height and 2.25 inches diameter

Instructions: Oriland

The origami lily is a popular traditional origami. It is easy enough to be tried by a beginner. Placing one lily inside another gives an appearance of a whole lot of petals.

And there are so many different things that you can do with the lily. These look good as single flowers; if a stalk and leaves are added and a bunch of lilies are gathered together, they would look lovely in a flower vase; It is also possible to form a lily kusudama.

Model Details:

Model: Lily 

Origin: Traditional

Difficulty Level: Simple

Paper Ratio: Square

Paper Size: 4 inches

Instructions: Origami Instructions