Well, after completing the Plain Octagon Box from last week, I couldn't wait to try one more of the boxes from Tomoko Fuse's 'Joyful Origami Boxes'. 

This time, I tried out the Double Pinwheel box described on page 70. For the assembly, I tried the second assembly, since I wanted the back of the paper to be visible as much as the front. The folding and assembly are not too difficult.

So now, I just have to try the variations on Page 72 😊

Model Details:

Model: Octagon Double Pinwheel Box

Creator: Tomoko Fuse

Book: Joyful Origami Boxes

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3.5 inches

Model Size: 3.5 inches across

Number of Modules: 16

'Joyful Origami Boxes' by Tomoko Fuse is an amazing book if you like folding origami boxes. I had previously tried out a couple of the models from the book - The Heptagon Starry Pinwheel Box and the Hexagon Pinwheel Box. But this was way back in 2011, so when I got another opportunity to fold something from this book, I decided to try out the Octagon series.

Similar to the Hexagon and Heptagon boxes, Tomoko Fuse has given detailed instructions for making quite a few Octagon boxes - Pinwheel, Flowery Pinwheel, Starry Pinwheel and Double Pinwheel are some of the variations she has detailed in the book.

What I have folded is the Octagon Box - Plain, found on page 69. The folding is pretty straight forward and as always, steps are accurately described. Assembly was also fairly easy. I used coloured printer paper, so that the box is nice and strong.

I do hope to fold more of these boxes in the coming days. Page 72 gives a list of variations on the Octagon Box and this is something I absolutely want to try.

Model Details:

Model: Octagon Plain Box

Creator: Tomoko Fuse

Book: Joyful Origami Boxes

Author: Tomoko Fuse

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3.5 inches

Model Size: ~3.5 inches across and 0.75 inches in height

Number of Modules: 16

Since I am fairly confident of making circular dishes using newspaper weaving, I decided to venture a little further and try my hand at other shapes. The model I had readily available with me was a square dish, so I decided to use that to make these knick-knack dishes.

I made a series of them. The first was made using pastel coloured newspaper tubes, that were actually left-overs from previous projects. I must say I was pleasantly surprised by how well it turned out!

For the next couple, I used a mix of brown and yellow tubes with the newspaper print visible. I have come to realise that people are more attracted to the products which show the print, rather than those made from the plain, coloured tubes. I guess when the print is visible, it provides additional proof that it is really made from paper? I don't know, that is just a guess 😀

Anyway, I have also developed a liking for these rolls, so I hope to make more products using similar paper. For now, I am happy with the way these dishes have turned out. The brown ones have been confiscated as soon as they were done - apparently my brother absolutely needs them to organise his office desk!  And the pastel one has, naturally, been taken over by Little Miss. So that was that. 3 dishes done and I still lack dishes to organise my own desk! 😄

Well, a recent order for a pot holder made from newspaper rolls with order to 'go crazy!' gave me the liberty to try out this cute snail pot holder. Since I wanted the newspaper print to be visible, I coloured the paper with print in brown and cream and ended up with a real cute holder.

To hold the snail shape, I threaded the tubes with wire - that meant I was able to shape it well and it also made the weaving a lot easier! Finally 2 too big eyes and a coat of varnish and the holder was ready 😊

Here is the holder with a small pot in it. The picture really does not do justice to how well it turned out! And once the order was complete, I needed to make one more, since Little Miss had fallen in love with it. So the next one I made was smaller and was more of a pen stand. I reused some of the newspaper tubes from another project and ended up with a yellow and purple snail pen holder.

In recent times I have made quite a few of Tomoko Fuse's modular origami. So for a change, I decided to try out Tom Hull's Bouncy Ball.

The Bouncy Unit Icosahedron, better known as the Bouncy Ball is made from 30 square modules. The folding starts with creasing into fifths. Once the paper is folded into fifths, the strip is folded to form the modules. So thin origami (60 gsm) paper is recommended, as we will be folding 5 layers of paper together.

Assembly is a little challenging, but once fully assembled, the model is really strong. And makes a great bouncy ball!

Model Details:

Model: Bouncy Ball 

Creator: Tom Hull

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3.5 inch squares

Model Size: ~4 inches in diameter

Modules: 30

Tutorial: Youtube

The Edge Unit A is the first of the modular origami designs from Tomoko Fuse's 'Unit Origami Wonderland'. The edges form a 90 degree angle on either side.

I have folded the cube, made from 12 such modules. The model is quite firm and assembly was not too much of a challenge either. Overall, a pleasing modular to work on.

Model Details:

Model: Cube from Edge Unit A 

Creator: Tomoko Fuse

Book: Unit Origami Wonderland
 
Author: Tomoko Fuse

Language: Japanese
 
Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: ~3 inches side

Modules: 12

By far, my most professional attempt at my paper weaving projects, this orange and grey newspaper woven cup and saucer is my personal favourite. 

The tubes were actually part of my previous project - a coffee themed oval container. I loved the colour combination, so decided to make another project using the same. 

A lot of planning went into this set - from the way to start off and the method to interchange the colours, the reverse rope pattern in the centre, the edging of the saucer and also the cup - everything was planned. And I must say I am quite happy with the way it turned out. Specifically, I love the cross-pattern of the bottom and the beauty of the edging for both saucer and cup. 

To add durability to the handle, I ended up threading a wire through the 2 main anchoring tubes. So once I varnished it, the handle became incredibly strong. And overall, the cup can hold quite a bit of weight. 

I believe I have waxed eloquent about the project!! I do realise that the height is not even and this is my biggest problem. I am yet to figure out a way to maintain consistency, but I believe I will get there 😊