A little origami modular to start the New Year 2021! Happy new year! 

This nice little modular, called Origami Rain Star is designed by Aldo Marcell. I have folded a couple of his models before - the Origami Tornado and the Origami Cyclon. And so I was quite excited and scared of folding this one! The Origami Cyclon was really a difficult one to fold! But this turned out to be a joy to fold and assemble and very economical to boot! 

This model is folded from a rectangle 1:3 in ratio. So I used double sided origami paper, 7.5 cms in size. I divided the paper into 3, so the pieces I ended up with were 2.5 cms by 7.5 cms. The individual modules were quite easy to fold. And the assembly was also surprisingly easy!

 What surprised me the most about this model was the size of the finished model. 1-inch by 3-inch rectangles, I expected a small model. Turns out this model was quite different! The final model measured approximately 4 inches in diameter.

Double-sided paper works best and I love the way those little stars show up when the modules are assembled. 75 gsm origami paper works best for sizes that I usually fold. 

Model Details:

Model: Rain Star

Creator: Aldo Marcell

Difficulty Level: Low Intermediate

Paper Ratio: 1:3

Paper Size: 1 inch by 3 inches

Model Size: ~4 inches in diameter

Modules: 30

Instructions: Stranamasterov.ru

Tutorial: Youtube 

Uniya Filonova's Cassiopeia Kusudama has been on my to-do list for quite some time. Finally, this Mother's Day seemed to be the right occasion to try out this eye-catching design.

Did you know that Cassiopeia is actually the name of a constellation? Yep! And in the kusudama, the stars do stand out, but this modular reminds me more of a flower than a constellation. What do you think?

Getting back to the kusudama, it is made from 30 modules, with each module folded from a rectangle in the ratio 1:3. So one square will yield you 3 modules. I had used 3 inches (7.5 cms) squares that I cut into 3 rectangles. So each rectangle measured 1 inch (2.5 cms)  by 3 inches (7.5 cms). The end result was a ball about 3 inches (7.5 cms) in diameter.

While I did find both the instructions and the tutorial (links below) a little confusing initially, once you get the hang of it, the modules are very easy to fold. And even with the size I had chosen, it was not difficult to fold the individual modules.

Double sided paper works best to bring out the star. I had used some very precious paper that I absolutely love - red with white dots on one side and yellow on the other. Very happy with the selection and with the result.

The assembly is interesting - you have to try it out to appreciate it. It does not involve the usual pocket and flap assembly that you usually see in modulars, rather, one petal is folded into the adjoining petal. Very interesting and very robust. Assembly is without any glue.

Finally, a happy Mother's Day to all the moms out there! Little Miss has decided that this modular is going to be her gift for me!! 😆😆

Model Details:

Model: Cassiopeia Kusudama 

Creator: Uniya Filonova

Difficulty Level: High Intermediate

Paper Ratio: 1:3

Paper Size: 1 inch by 3 inches

Model Size: ~3 inches in diameter

Modules: 30

Instructions: Stranamasterov.ru

Tutorial: Youtube

Aldo Marcell's modular origami models are really, really pretty to look at! I had previously done the ever-popular Tornado.

So this time, I decided to work on the Cyclon model. Overall, the model is very economical, in that, the paper is in the ratio 1:3. Which means from 1 square, I managed to get 3 modules. Considering I was using some of my precious double-sided paper, this was very nice!

And folding the individual modules was also pretty easy. But the assembly is a whole different story altogether! It is seriously difficult! And this was aggravated by the size of the modules. Since I had divided up a 3-inch square into 3, I was working with small pieces of paper and, while I have folded really tiny pieces for my origami jewellery, it was obvious I have lost the touch of handling small pieces.

So to reiterate, the modules are easy to fold but really difficult to assemble! At one point, I was fairly certain that I was just going to lose patience and crush the whole thing 😔 It was only the thought of folding 30 modules again that stopped me from flinging it all away!

Anyway, I am glad I persisted. I am happy with the outcome. But going forward, I will doubly careful before choosing any of Aldo Marcell's models to fold 😆😆

Model Details:

Model: Cyclon 

Creator: Aldo Marcell

Difficulty Level: High Intermediate

Paper Ratio: 1:3

Paper Size: 1 inch by 3 inches

Model Size: ~2.5 inches in diameter

Modules: 30

Instructions: Stranamasterov.ru