The origami spiral is yet another beautiful modular origami by Tomoko Fuse. Because of how colourful it looks, I had tried this out a long time back - about 3 years back, when I was pretty much a newbie to origami. While folding the modules was pretty easy, I just couldn't figure out how to connect one unit with the next. And finally gave up.

Now, since I have gained a little more experience, I gave it another try. It still required some figuring out, but I was able to get the principle at last :)

I wanted to make a spiral with at least 10 rings in it. Since each ring has 8 modules, I needed at least 80 modules. I added a few more, till I had 100 modules in all and finally set about assembling the modules. So now, based on the number of modules used in a model, the spirals is my biggest project!

The basis for the spiral is the ring which is made from 8 modules. The ring itself will make a good Christmas decoration I think. It would be better to use 80 gsm paper, though this might make it a little difficult to assemble the modules. If making the spiral, I would suggest 60 gsm origami paper. Colourful paper is best for the spirals, resulting in some very colourful and attractive origami.

Be sure to glue the joints, especially for the spirals - rest assured, everyone who sees it will want to handle it and you will end up with many modules that have come undone, unless it is glued in place.

I had used 3-inch squares for making the modules and ended up with a spiral that measured about 6 inches in diameter - a little too big to be used as a slinky! But in spite of that, everyone who has seen it has attempted using it as a slinky!

Model Details:

Model: Rings and Spirals

Creator: Tomoko Fuse

Book: Floral Origami Globes

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3

Model Size: ~ 6 inches in diameter

Diagram: OrigamiModular

I am not sure of the creator of these origami pleated boxes. My guess would of course, be Tomoko Fuse. But I am not able to find any reference to the box in any of her books. Unfortunately I do not remember where I learnt to fold this either. And I do not remember the name of the box either. Since it has got a whole bunch of pleats, I just call it the pleated box. So, not knowing any of these details, I have had little success in finding out the creator. But for now, I am tagging it as Tomoko Fuse.

The box can be made from a variety of paper. I have tried mine with wrapper paper, hand made paper, origami paper, printer paper and it turned out well in all of them. The one made from origami paper (the variations-in-blue one) is my favourite. I tried it out in a variety of sizes too. From 5 inch squares to 2 inch squares. All look fantastic I think :)

Model Details:

Model: Pleated Box 

Creator: Tomoko Fuse

Difficulty Level: Low Intermediate

Paper Ratio: Square

Modules: 4 for the base and 4 for the lid

The truncated icosahedron is another of Tomoko Fuse's modular creations. This is from her book Unit Polyhedron Origami. The model is fairly easy to do. It rather reminds me the origami football I had folded nearly a year back!

The model is made of a combination of hexagonal flat units and connecting units that connect the hexagonal units. Usually modular units have a pocket and a tab - each tab fits into its adjacent unit. But in these models, the hexagonal shapes have 3 pockets and no tabs. So the connecting units fit into the pockets of adjacent hexagons and hold the model together.

I like the little windows in the model as well :) Also, though the backs of the hexagons can be seen through the windows, the reverse side of the paper is not seen in the completed unit. So single-sided paper works perfectly well. I had used 80 gsm paper which turned out to be great for this model. The completed truncated icosahedron is sturdy - so sturdy, in fact, that my brother suggested we use it as a football! 😮

Model Details:

Model: Truncated Icosahedron

Creator: Tomoko Fuse

Book: Unit Polyhedron Origami
 
Author: Tomoko Fuse
 
Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3.5 inches for the hexagons; 1.75 inches for the connectors

Model Size: ~5 inches in diameter

Modules: 50

After folding the octagonal box from 4 units, I tried the 8-unit box. While folding, I realized that the 4-unit version is actually an extension of the 8-unit box. So folding the individual modules was pretty easy.

The assembly was not as easy as the 4-unit box. Mainly because there are 8 arms that have to be folded together to form the spiral at the top. And obviously, dealing with 4 spiral arms was way easier :)

I had used 3 inch squares to make the modules. So the result was a fairly small, octagonal box which is the perfect size for gifting jewelry in.

Model Details:

Model: Octogon Box 

Creator: Tomoko Fuse

Book: Let's Fold Spirals
 
Author: Tomoko Fuse
 
Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: ~ 2.5 inches across and 1.25 inches tall (including spiral)

Modules: 16 (8 for base and 8 for lid)

This month's theme at the Origami Society of Madras is Boxes! Yay! Love it :)

So I got cracking with this octagonal box by the ever-prolific Tomoko Fuse. I have this absolute fascination for boxes with spirals. I am always astounded by how beautifully elegant they look! So I worked on this spiral box from Tomoko Fuse's 'Let's Fold Spirals'.

A couple of years back, I had completed yet another spiral box - a hexagon and I love that box. I still have it and it is still as sturdy as ever. The octagon box, though, isn't as sturdy as the hexagon box because of the way it is constructed. This box is made from 4 modules for the lid and 4 for the base. And each module forms 2 sides of the octagon.

I had used 80 gsm paper (love the rather Christmassy look that the red/green combination brings in!) which gave stability to the box. Thicker paper should work much better though.

Model Details:

Model: Octagonal Box with Spirals 

Creator: Tomoko Fuse

Book: Let's Fold Spirals
 
Author: Tomoko Fuse
 
Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 5 inches

Model Size: ~4 inches across and 2 inches tall (including spiral)

Modules: 8 (4 + 4)

Tomoko Fuse's book 'Unit Origami Fantasy' is in Japanese, so I am not able to find the name of this model! Hence the generic title for the post :) Do leave a comment if you are aware of the name of the model. Though the book is in Japanese, the detailed step-by-step instructions are more than enough to complete the models.

As far as the model goes, this is a simple model, made from a windmill base. I used printer paper (80 gsm) for the units, which turned out pretty good for this model. I think if I had used regular 60 gsm origami paper, the model might not have been as sturdy. For a sturdier model, thicker paper such as scrapbooking paper should work well, given the simplicity of the folds and the assembly.

In general, for modular origami, I tend to go for the icosahedron assembly (30 unit assembly). But for a change, I tried the cube assembly (12 unit assembly). Each face is made from 4 modules and there are a total of 6 faces to the cube.

Model Details:

Model: Cube Modular 

Creator: Tomoko Fuse

Book: Unit Origami Fantasy
 
Author: Tomoko Fuse

Language: Japanese
 
Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: ~3 inches

Modules: 6

I am quite fascinated with Tomoko Fuse's book 'Floral Origami Globes' and after completing the Butterfly Kusudama, I didn't waste much time, working on the next kusudama.

This kusudama is the Chrysanthemum Globe Kusudama, assembled from 60 rectangles. Each unit is assembled from 2 rectangles - a base and the chrysanthemum, inserted into the base.

The kusudama assembly is the basic sonobe assembly for 30-unit icosahedrons, but with a small difference. While the sonobe assembly is in a clock-wise direction (the pockets open to the right and the tabs go into these pockets), the chrysanthemum assembly is anti-clockwise - that is, the tabs are inserted into pockets that open to the left.

The chrysanthemum unit has multiple layers of paper in the central petal, so thin paper works better. I have used regular copy paper and had to be extra careful when folding it so that it did not tear in the middle.

Model Details:

Model: Chrysanthemum Globe Kusudama 

Creator: Tomoko Fuse

Book: Floral Origami Globes
 
Author: Tomoko Fuse
 
Difficulty Level: Low Intermediate

Paper Ratio: Rectangle in ratio 1:2

Paper Size: 4 inches by 2 inches

Model Size: ~5 inches in diameter

Modules: 30

Tutorial: Youtube 

It has been quite a while since I folded modular origami and even longer since I folded any of Tomoko Fuse's amazing creations. This modular kusudama is the Butterfly Kusudama (Type III) and is from the book 'Floral Origami Globes'.

The model is made from 30 units and each unit is made from 2 rectangles. The fan-like section is folded into a base section to form 1 unit. I have glued the two parts of the fan, but as per the instructions, they are left as-is to represent the 2 wings of the butterfly.

Model Details:

Model: Butterfly Kusudama 

Creator: Tomoko Fuse

Book: Floral Origami Globes
 
Author: Tomoko Fuse
 
Difficulty Level: Low Intermediate

Paper Ratio: Rectangle in the ratio 1:2

Paper Size: 3 inches by 1.5 inches

Model Size: ~4 inches in diameter

Modules: 60

One of my favourite modular origami is Tomoko Fuse's Little Turtle Kusudama. I had made them a couple of years back, using beautiful, vibrant paper.

I had a workshop coming up and wanted to remake this model, since my previous kusudamas have been distributed long back! While previously, I had using paper that had colourful flowers on a white background, this time I wanted to go with a softer tone. And I quite like the paper I have used - cream coloured paper with a gold pattern on it. I had bought this paper more than a year back and found it while going through my huge stack of paper. 

What say you? Does it look good? Or is it too dull?

PS: While entering the model details, I realised that I had previously marked the difficulty as high intermediate. Well, it was quite difficult for me then. But now, I think it is a low intermediate model. So what do I do? For now, I am going to continue marking it as high intermediate, because my blog is mostly used by beginner origamists. And I believe I need to re-look at my past posts to ensure that the difficulty level is labelled correctly ie., for beginner origamists :)

Model Details:

Model: Little Turtle Kusudama 

Creator: Tomoko Fuse

Book: Multidimensional Transformations Unit Origami
 
Author: Tomoko Fuse
 
Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inch squares

Model Size: ~4 inches in diameter

Modules: 30

Tutorial: Youtube 

This heart dish is a modular dish, made from 4 squares. An apt origami for Valentine's Day I thought. I am not able to find out the creator of this model. The youtube tutorial that I referred to, mentions that it is Tomoko Fuse, but unfortunately I am not able to find this model under her name on the Origami database. And well, whether the creator IS Tomoko Fuse or not, it is still a good one to fold, especially for a day of love.

Origami paper might be a bit too thin for the heart bowl. Printer paper or gift wrapper, about 80 gsm or so should result in a good, not-so-flimsy dish. Fill it with some hearts and it should make a very nice, unique, handmade gift :)

Model Details:

Model: Heart Dish

Creator: Tomoko Fuse

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 4 inches

Model Size: ~1.5 inches tall and 4 inches across

Modules: 4

Tutorial: Youtube

I love folding spirals and I think the queen of origami spirals would be Tomoko Fuse! So since it has been a long time since I folded boxes with spirals, I tried out this little 4-sided box, from her book 'Let's Fold Spirals'. This box is the second of the 2 square boxes and is a pleasure to fold. It took me about 15 minutes to complete the full box, pretty fast I think.

I had used fairly sturdy paper (4*4 memo paper) to fold it, so the end box was also quite sturdy. I like the shape - the height is greater than the usual origami boxes. The spiral also gives the impression of an even taller box. And the slanting lines add a great touch.

Altogether a delightful box to fold :)

Model Details:

Model: Square Spiral Box

Creator: Tomoko Fuse

Book: Let's Fold Spirals

Author: Tomoko Fuse

Language: Japanese

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 4 inches

Model Size: ~2.5 inches tall (the spiral adds half an inch) and 2 inches wide

Number of Modules: 4

The Ari Jigoku or Ant Lion’s Nest is a modular origami, designed by Silvana Betti Mamino. The units are made from rectangles in the ratio 1:2. A total of 30 units are required. The curls should be completed before the assembly. The completed kusudam is very sturdy and does not require any glue.

The origami looks best in solid duo coloured paper. I also tried one with wrapper paper but unfortunately, the curls do not show up very well, so it wasn’t much of a success.

Model Details:

Model: Ari Jigoku

Creator: Silvana Betti Mamino

Book: Unit Origami Fantasy

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Rectangular in ratio 1:2

Paper Size: 3 inches * 1.5 inches

Number of Modules: 30

Tutorial: Stranamasterov.ru

Tomoko Fuse's boxes are really simple to make and I love making them! So here goes another of her boxes from her book 'Quick and Easy Origami Boxes'.

I rather like the little knob on the lid. Adds a little something and gives us a handle to use to open the box :)

Model Details:

Model: Triangular Boxes

Creator: Tomoko Fuse

Book: Quick and Easy Origami Boxes

Author: Tomoko Fuse

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 4 inches

Tutorial: Youtube

Number of Modules: 6 (3 for box and 3 for lid)

A heptagon or septagon is a 7-sided polygon and this box contains 7 sides. The design is again, by Tomoko Fuse, from her book ‘Joyful Origami Boxes‘.

The folding is somewhat similar to the hexagon box I had folded earlier. The main difference is in the way the angle is decided for a heptagon.

Since the box has an odd number of modules, I think it looks better if made from a single solid colour or from a single patterned paper. Using alternate colours means there were will be 2 modules in the same colour which stands out like a sore thumb!

Model Details:

Model: Heptagon Starry Pinwheel Boxes

Creator: Tomoko Fuse

Book: Joyful Origami Boxes

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 5 inches

Number of Modules: 14

The hexagon pinwheel box is a design by Tomoko Fuse, from her book 'Joyful Origami Boxes'. It is made from 6 squares of paper and joined without glue.

The lid looks best when folded with duo coloured paper. But I think it looks great when folded from any dark-shaded wrapper paper too.

And as in most cases, I did use wrapper paper to fold this box :) I love the variety offered by the paper and always prefer using it to any solid coloured paper, especially for boxes.

Model Details:

Model: Hexagon Pinwheel Box

Creator: Tomoko Fuse

Book: Joyful Origami Boxes

Author: Tomoko Fuse

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 5 inches

Tutorial: Lid, Base

Number of Modules: 12

The Origami Pinwheel Cube is designed by Tomoko Fuse and is found in her book 'Multidimentional Transformations Unit Origami'. The cube is formed from just 6 units, so as compared to the other cubes that I have done in recent days, I found it pretty quick to complete. 

The name of course, comes from the pinwheel shape that is seen on each of the faces. Origami paper that has different colours on both sides will work best. 

Model Details:

Model: Pinwheel Cube 

Creator: Tomoko Fuse

Book: Multidimensional Transformations Unit Origami
 
Author: Tomoko Fuse
 
Difficulty Level: Simple

Paper Ratio: Square

Paper Size: 4 inch squares

Modules: 6

Tutorial: Youtube (Folding and Assembly)

A few months back, I had done Tomoko Fuse's Little Turtle and this time I tried a variation of that. Instead of using 3 modules, the variation uses 5 units. Other than that, everything else remains the same.

The design doesn't really need origami paper. It looks very good when done with heavy, wrapper paper that is brightly coloured. The first little turtle I had made was also from the same paper as the one I have used here :)

Model Details:

Model: Little Turtle Variation 

Creator: Tomoko Fuse

Book: Multidimensional Transformations Unit Origami
 
Author: Tomoko Fuse
 
Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 4 inch squares

Modules: 30

Tutorial: Youtube

The Flat Sonobe is yet another variation of the Sonobe, designed by Tomoko Fuse. The Icosahedron of the Flat Sonobe is made from 30 units. Assembly is the same as all icosahedrons, with 3 unit triangles which are used to form 5 unit rings.

The 30-unit version does require glue to hold it together. So be sure to have some glue handy before assembling this one. 6 or 12 unit versions can also be made, which are fairly easier to make.

Model Details:

Model: Flat Sonobe

Creator: Tomoko Fuse

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 4 inches

Number of Modules: 30

Tomoko Fuse's book 'Origami Rings and Wreaths' is an absolute treasure trove if you are interested in making origami rings and wreaths.

This model that I tried out, called the Ring 16, is made up of 12 modules. It works best with double-sided paper, so I used some of my very precious, very new double-sided paper to make this pretty ring.

Folding the individual modules is also simple but does involve popping out paper a couple of times. This should be done with care, since the paper might tear quite easily while pulling it out.

So, with yet another ring/wreath, it appears that I am getting ready early for Christmas this year!!

Model Details:

Model: Ring 16

Creator: Tomoko Fuse

Book: Origami Rings and Wreaths

Author: Tomoko Fuse

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Number of Modules: 12

Yet another ring from the book 'Origami Rings and Wreaths' by Tomoko Fuse. This one is just the perfect thickness that makes it a perfect addition to my Christmas wreath collection.

I had used some Christmas wrapping paper and I love the mix of red and green in the ring. The ring is made from 16 squares. I had used 3 inch squares and the final ring measured about 4.5 inches in diameter - not big enough to hang on the door, but would look good on our Christmas tree. I even added a loop at one end to help hang it up.

Model Details:

Model: Ring 10

Creator: Tomoko Fuse

Book: Origami Rings and Wreaths

Author: Tomoko Fuse

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 3 inches

Model Size: 4.5 inches in diameter

Number of Modules: 16