After the tutorial for making the masu box, here is the tutorial for the lid :)

The lid is made from a square the same size as the base. In spite of that, it needs to be slightly larger than the base so that it fits well. And I like my lid to be of a lesser height, so that it is easy to open the box. So with a few changes to the masu box, here is the masu lid! :)

I have explained in a lot of detail, so that all steps are clear. So though it make look like a lot of steps, it isn't very difficult to do. Please drop a comment if any step is unclear.

Time Required: ~10 minutes
Difficulty Level: Simple
What is needed: 

• 2 squares of paper, both measuring around 8 inches.
• Pencil or pen to make some markings
• Paper clips
• Glue

How to Fold:

1. The green square is the one that will be used for the lid.

2. Follow Steps 3 to 7 in the masu box tutorial, so that all four corners are folded to the centre.

3. Unfold the masu box completely and fold the four corners to the centre. The yellow one is the unfolded masu box. We need this so that we can fold the lid slightly larger than the base.

4. Place the 2 pieces face-to-face so that the folded corners are inside. We are going to align the pieces so that the folded edge of the lid lines with the first crease of the base (marked with a dotted line in the base).

5. Align the lid exactly on top of the base, as shown. Use a paper clip to hold the pieces in place. Once you get the hang of this, you will no longer need the paper clips :)

6. Turn it over so that the base sheet comes on the top and the lid at the bottom.

7. Now fold the part of the lid that is projecting out, over the base. You will notice that the edge of the lid does not line up correctly with the crease in the base. This will ensure that the lid is just a tad bigger than the base. Repeat Steps 5 to 7 for the remaining 3 edges.

8. Open up completely and place the paper so that the coloured side is facing you.

9. Fold in half so that one edge meets the other but don’t crease fully. Only crease from the edges to the next crease. Repeat for the other edge.

10. Unfold and turn over so that the white side faces you.

11. The next crease is going to be made using the 2 consecutive creases, marked in Step 11.

12. Fold and align the marked creases, so that you have a new crease mid-way between them. This will be the actual height of the box. You can play around with this fold, to make the lid a little taller or shorter than this. Repeat the fold for the other 3 sides.

13. Open up. You have now made all the creases necessary for folding the lid.

14. You can reinforce the crease made in Step 12 to ensure that the sides of the lid is sharp.

15. Fold opposite corners as shown and life up to form 2 sides of the lid. The corners will not meet in the centre, as in the base, but rather, will overlap and touch the opposite edge.

16. Now, the steps are the same as the base. Push in the the corners on the third side. The paper will naturally fold in on existing creases. Use paper clips, if required, to hold in place.

17. Fold down inside and crease well. 3 sides now completed.

18. Repeat on the 4th side. Crease the edges well. Since the sides are shorter than the base, you will need to glue down the parts that were folded in.

19. Refold your base. Cover the base with the lid, it should fit perfectly :)

When I had posted these masu boxes earlier, a friend of my mother's, a very creative lady herself, had remarked on my Facebook page that these boxes very amazingly beautiful :) Well, that gave me quite a high! And got me busily working on the tutorial that I had promised in the post.

On an aside - If you have followed my previous tutorials, I usually make them from Google's Picasa's collages. But lucky me, I found a new collage maker called 'Picture Collage Maker Pro'. I found the software remarkably easy to use and am quite fond of this new tutorial! What do you think? Is it better than my previous ones?

Well, to continue with my tutorial, today I will post the one for making the actual masu box. It is relatively simple and can be done in 10 minutes, tops.

Time Required: ~10 minutes
Difficulty Level: Simple
What is needed: 

• 2 squares of paper, both measuring around 8 inches.
• Pencil or pen to make some markings
• Paper clips
• Glue

How to Fold:

 

1. I am using paper coloured on a single side, yellow for the base and green for the lid.

2. Well, the yellow will be the one in this tutorial.

3. Flip the paper over so that the white side is facing up.

4. Fold along the diagonal and pinch the centre. Don't crease the entire diagonal. You are just trying to find a centre point.

5. Open. Fold along the other diagonal and again, pinch the centre.

6. The two pinches from Steps 4 and 5 should have intersected at the centre. I have marked it with 2 perpendicular lines. You can mark it with a pencil if it isn't very clear.

7. Fold the 4 corners to these markings and crease well.

8. Unfold 2 opposite flaps.

9. Fold the folded edge to the centre as shown.

10. Repeat for the opposite flap.

11. Open up fully and turn it over so that the coloured sided faces you.

12. Fold in half so that one edge meets the other but don't crease fully. Only crease from the edges till you hit the creases made in Steps 9 and 10. Repeat for the other edge.

13. Unfold and turn over so that the white side faces you. You have now completed all creases for folding the box!

14. Fold opposite corners to the centre.

15. Lift the 2 sides on existing creases (made in Steps 9 and 10) and push in the the corners on the third side. The paper will naturally fold in on the crease made in Step 12. Use paper clips, if required, to hold in place.

16. Fold it down inside and crease well. You now have 3 sides completed :)

17. Repeat on the opposite side and you are done!

The flaps inside the box can be glued down for a cleaner look. If you wish to do that, please hold on till my next tutorial, cos we need to undo this box a bit, to get the right side for the corresponding lid.

If you are a regular reader of my blog, you would know that I love making boxes :) And the easiest boxes to make are masu boxes. Masu boxes are actually traditional Japanese wooden, square boxes that were used to measure rice.

The origami masu box is made from a square paper and results in a square box. These make great gift boxes, if a lid is added to it. The lid can also be made from paper the same size. Some minor variations to the regular masu box folding results in a slightly larger and shorter lid. Tutorial for this is coming your way! So stay tuned :)

As for the box, it is fairly sturdy if made from scrapbooking paper, printer paper or gift wrappers. If you want sturdier boxes, then it is better to cut out thin cardboard paper (say, from cereal boxes) and insert them into the base and sides of the box.

Model Details:

Model: Masu Box 

Origin: Traditional

Difficulty Level: Simple

Paper Ratio: Square

Paper Size: Any size from around 3 inches to 12  inches

Model Size: ~ a third of the paper size in width and a fifth in height. So if your paper is 6 inches, then the resulting box will be approximately 2 inches wide and 1.2 inches high.

Instructions: Origami Instructions