The Gekkin kusudama started off as a way to use some leftover pieces of squares that I had mistakenly cut out for my last kusudama, Kusudama Estrelle Flor. While I needed only 15 squares of each colour, I had incorrectly calculated and cut 30 squares. So I ended up with the extra squares which I did not want to waste. 

So the Gekkin kusudama came in very handy. I used 10 dark purple, 10 lavender and 10 white squares to make this very pretty kusudama. A tassel and some beads and I ended up with an attractive ornament! 

The modules are pretty easy to fold and assembly is also straight forward. Since I wanted to make it into an ornament, I glued the joints. The curls add a very nice touch to the kusudama, giving the impression of a bouquet, I thought.



Model Details:

Model: Gekkin 

Creator: Maria Vahrusheva

Difficulty Level: High Intermediate

Paper Ratio: Square

Paper Size: 3 inches 

Model Size: ~5 inches in diameter

Modules: 30

Diagram: Mediafire

Tutorial: Youtube


After the strenuous coiled or root-woven tray from my last post, I was more than happy to try out this acorn box made from black newspaper tubes.

I have been trying out various acrylic colours which will completely blot out any print in my newspaper tubes. For the lighter colours, I have no choice but to use white or mostly-white tubes. Otherwise the print is very obviously visible and I just don't like it. As a consequence, I find that I am left out with a  lot of tubes that have newspaper print/coloured pictures on them.

One way to go is to use them as-is and weave my boxes with the print and pictures visible in the end product. I find that there are a lot of people who like this and I have had some orders where I have been specifically asked to use the newspaper tubes without any colours added.

On the other hand, I have also been experimenting with dark colours that I can use on these tubes, to hide the print, and the very best colour is, of course, black. Other than black, dark blue, prussian blue, deep red and dark green also work well.


So for my acorn box, I have used black tubes to form the base and the lid. The base was woven with a form, which was a plastic bowl of the required size. I tried out a 3-strand weaving, which I liked very much. The lid started off as a flat plate, with the edges turned down to convert into a lid. I added the little knob at the very end.

Model Details:

Model: Black Acorn Box

Difficulty Level: High Intermediate

Tutorial (making newspaper tubes): Youtube

The Estrella Flor Kusudama is a modular origami created by Erny. Like my previous post, the Mt. Fuji Kusudama, the essential shape of this model is also a sonobe. And to form the sonobe modules, a total of 30 squares of paper is required. It works best if we use 15 squares of 1 colour and 15 squares of a second contrasting colour. That will bring out the flower pattern very well.

Each of the 15 squares are cut into 2 rectangles of ratio 1:2. So finally, to make the model, we will be folding 60 modules. 30 of these modules will form the flower shape and the other 30 will form the sonobe shape. The flower modules are slotted into the sonobe modules before starting the assembly. While the task seems quite daunting, the folding is not very difficult, though a little time consuming. Assembly is the usual sonobe assembly - 3 pyramids grouped in clusters of 5.

I quite like the colour choice I had made - dark purple and a light violet (or would that be mauve?) The final model is not too large, since I had used 7.5 cms squares. I decided to make it into a hanging ornament, so ended up with tassels and some beads to form the ornament.

Model Details:

Model: Kusudama Estrella Flor 

Creator: Erny

Difficulty Level: High Intermediate

Paper Ratio: 1:2

Paper Size: 3 inches by 1.5 inches

Model Size: ~4 inches in diameter

Modules: 60

Instructions: Folding in the air

Tutorial: Youtube

Recently I discovered a Youtube Origamist - Origami Kankichi. I later found out that he does have a blog and various other social media sites, but I prefer the youtube channel. Well, on his channel, he regularly posts tutorials on folding and assembling origami modulars. Most of this models are 30-unit assembly and of these, I especially like the sonobe variations - I have a particular fondness for sonobes. So after much deliberation, I decided to try out one of the sonobe variations that he has designed - the Mt. Fuji Kusudama.

The kusudama is a representation of Mt. Fujiyama in Japan. Naturally, it works best with blue and white paper. But, for me, the first time I saw this kusudama, I was reminded of Tomoko Fuse's Chrysanthemum Globe kusudama. So I decided to use a dark pink and white paper, to resemble a chrysanthemum covered mountain, I guess. Anyway, any contrasting colours should work out well for this kusudama.

The modular is made from 15 squares of dark pink and 15 squares of white origami paper. Each of the 15 squares are cut into 2 rectangles of ratio 1:2. So finally, to make the model, we will be folding 60 modules. 30 of these modules will form the mountain shape and the other 30 will form the sonobe base. The mountain modules are slotted into the sonobe bases before starting the assembly. While the task seems quite daunting, the folding is not very difficult, though a little time consuming. Assembly is the usual sonobe assembly - 3 pyramids grouped in clusters of 5.



Model Details:

Model: Mt. Fuji Kusudama  

Creator: Origami Kankichi

Difficulty Level: Low Intermediate

Paper Ratio: 1:2

Paper Size: 3 inches by 1.5 inches

Model Size: ~4 inches in diameter

Modules: 60

Tutorial: Youtube


One of the traditional methods of basket-weaving involves a technique called coiling. This technique combines a process of coiling materials such as grass and binding them together using flexible fibres.

The same process can be applied to tubes made from newspaper or magazines. Here the tubes are used in both the processes - they are wound and held together by other tubes. I first came across this technique of weaving in Pinterest and have since been fascinated by the method.

When I got an opportunity to try it out, I first attempted it using newspaper tubes. Needless to say, it wasn't much of a success! My coiling was loose and the tubes that held the coils together were not placed close enough to give a tight weave. And once you fail, even in something like craft work, it takes a lot of courage to get back on the proverbial horse, doesn't it?

So, after many months and with a lot of hesitation, I tried out this blue tray, in the shape of a leaf. The tubes are made from newspaper strips, around 10 mm in width and 260 mm in length, rolled around a 2mm skewer. I painted it prussian blue, since that was the colour I had in abundance! This time, since I knew what to expect, I was able to coil much better. Overall, it gave me much better results than my first attempt. The shaping is still a problem and that takes more practise I guess. On the whole, I am quite pleased with this attempt.

While this technique is more challenging than regular weaving, the result if much more pleasing. But I would not attempt this type of weaving unless I had a lot of time, because without doubt, it is much more time-consuming that the regular weaving that I do. This tray took me a good 3 days to complete! And that is just the coiling part. Time taken for rolling the tubes, painting and glazing the final product also needs to be considered.



Model Details:

Model: Coiled Blue Leaf Tray

Difficulty Level: Complex

Tutorial (making newspaper tubes): Youtube

Tutorial (coiling or root-weaving technique): Youtube

For the very first time, Little Miss went on a trip without me! She had gone on a weekend trip with her grand parents and her uncle's family. Well, more heart-rending for the mom than for the daughter, I think! 😆

Anyway, during this trip, my wonderfully thoughtful little girl decided to buy something for my husband and for me. She put in a lot of thought into the gifts and we feel blessed to receive them. For my husband, she got a shirt in his favourite colour and for me, she bought some gorgeous origami washi paper in a variety of colours! I am truly touched.

So such a thoughtful gift required a well thought-out origami. So after a lot of research - and I assure you I did quite a bit of research - I decided to make this beautiful pyramid box by the wonderfully amazing Tomoko Fuse.

Absolutely love the way it has turned out. And Little Miss also liked what I finally came up with :) The model is taken from the book 'Origami Boxes' by Tomoko Fuse and is published by Tuttle Publishing. The first part of the book starts with a lot of variations to the traditional Masu box, followed by the Pyramid Box and finally, the Dome Box. Part 2 deals with modular boxes from square sheets of paper. Finally, Part 3 deals with modular boxes made from rectangular sheets of paper. It is a very good book, I thought, with a lot of colourful pictures to help one visualise better.

As for the Pyramid Box, each box is made from 2 sheets of origami paper, 6 inches squares. The steps are not very difficult to follow, though the final collapse when making the lid might prove a little challenging initially. A variation is also shown for the lid - that is the yellow box in the picture above. For the base, Tomoko Fuse has also kindly provided instructions for increasing the size of the base and also instructions to make it more sturdy. The base is, of course, easier to make than the lid.

Altogether, a good origami project to work on and I thought, a fitting use of some lovely washi paper.

Model Details:

Model: Pyramid Box

Creator: Tomoko Fuse

Book: Origami Boxes

Author: Tomoko Fuse

Difficulty Level: Low Intermediate

Paper Ratio: Square

Paper Size: 6 inches

Model Size: 2.5 inches across and 2.5 inches in height

This blue bowl is the first large-sized bowl that I have tried, that has come out reasonably well! The problem with bowls that I have found is that, while the start is pretty standard with the help of a form, it is inward curve at the top that causes trouble.

The reason being that a form can no longer be used! So this is more of eye-balling the correct curvature so that the bowl is shaped uniformly. I have always had a problem with this and usually my bowls turn out a little too one-sided for my liking! So I am quite delighted that for the very first time, I have done a decent job and the bowl looks more centred.

I also like the way the edging has been done. The edge with a whole bunch of 'V's is more attractive than the usual edges that I use and gives a good finish to the bowl, I thought.

Model Details:

Model: Woven Bowl

Difficulty Level: High Intermediate

Tutorial (making newspaper tubes): Youtube